Tenneco / Heckethorn - Tier 1 Complete Plant Closure - Day 2 Hosted by Levy Recovery Group on 2019-05-28 11:00:00 EST in Bloomfield Michigan United States Complete lots list (current bid high to low)2007 Ford Model Edge, SUV, VIN: 2FMDK36C97BB54001, 4-Door, Toyota Model 8FGU30, 6000-Lbs. x 187" Lift Capacity, LP Gas Fork Lot-(1) 18' 3-Piece Conference Table with (18) Executive High Back 1990 Ford Model F-150 Pickup Truck, VIN: 1FTDF15N4LLA66497, Scrap Contents of Semi Trailer, (Trailer Not Included), (Bldg. 3) Toyota Model 7FGCU25, 5000-Lbs. x 189" Lift Capacity, LP Gas Lot-(34) Steel Gaylord Tubs, (E-17) Lot-(32) Steel Gaylord Tubs, (E-17) Lot-(185) Steel Gaylord Tubs, (B-19) Hyster Model S100E, 11,400-Lbs. x 182.5" Lift Capacity, LP Gas Mitsubishi Model FGC25K, 5000-Lbs. x 188" Lift Capacity LP Gas Tennant Model 8300, Sit Down Ride On Electric Floor Scrubber Hyster Model XL2, Approximately 2000-Lbs. x 187" Lift Capacity, Lot-Scrap in Steel Gaylord Tubs, (E-12) Monarch Model 10" EE, Lathe, (Bldg. 2 Toolroom) Lot-(4) Dump Hoppers in (1) Row, (D-10) Genesis Welding Cell with Panasonic PanaRobo Robot, Model Lot-Approximately (153) Steel Gaylord Tubs, (Bldg. 2) Haier Chest Freezer with Ice-O-Matic Ice Machine, (A-14) Lot-Approximately (108) Steel Gaylord Tubs, (Bldg. 2) Lot-(86) Steel Gaylord Tubs, (C-11 Thru C-12) Lyon Industrial 2-Door Cabinet with Inspection Maintenance Lot-Furniture and Printer in (1) Office, (Main) Lot-Scanners and Electronics in (5) Boxes Toyota Model Approximately 5000-Lbs. x 189" Lift Capacity, LP Gas Toyota Model TFGCU25, 5000-Lbs. x 189" Lift Capacity, LP Gas Hyster Model S80XL, 8650-Lbs. x 120" Lift Capacity, LP Gas Fork Lot-Tooling and Setup with (8) Shelving Units, (D-19) Lot-(26) Steel Gaylord Tubs, (Bldg. 2) 10-Drawer Tooling Cabinet, (Bldg. 2 Toolroom) Ingersoll-Rand Model TS4N5, 5-HP Vertical Tank Mounted Air Lot-(6) Dump Hoppers in (1) Row, (D-10) Lot-Ring Thread Gages in (2) Boxes, (Bldg. 1 Inspection) Trimos AltriaType A600, Digital Height Gage, S/n 20844, Sylvac Lot-Furniture in Lobby, (Main Reception Desk Not Included) Northern Industrial Model 89138, 1/2 - 4" Pipe Threader Machine, Lot-Furniture and Computer in (1) Office, (Main) Lyon 7-Drawer Tooling Cabinet, (Bldg. 2 Toolroom) Micro-Vu Model H14, 14" Optical Comparator, S/n 2811, Micro-Vu Lot- (1) Wilton 4 1/2", (1) 4" Machinist's Vises with Stand, (A-10) Lot-(5) Various Miller and (1) Powcon Welders on (2) Pallets, (Not Grob Type NS18, 18" Vertical Contour Metal Cutting Band Saw, Lot-Furniture in (1) Office, (Main) Lot-Balance of (3) Machines in (1) Row, (Not in Service), (Bldg. 3) Hyster Model N35ZRS2-14.5, 3500-Lbs. x 191" Lift Capacity Stand Lot-(2) Mitutoyo Absolute 6"/150mm and (1) 8"/200mm Digital Mojave 24" x 36" x 4" Black Granite Surface Plate with Portable Lot-(32) Gaylord Steel Tub Stands, (C-12) Miller Syncrowave 250, 250-Amp Capacity CC AC/DC Tig Welder, Miller Millermatic 250, 200-Amp Capacity, CV DC Mig Welding Power Lot-Contents of Upstairs Storeroom, (No Electrical, No Building Lot-Benches, Stands, File Cabinet, Lockers, Tool Boxes, (C-16) Ingersoll-Rand 5-HP Vertical Tank Mounted Air Compressor, (Not Lot-Press Dies on/with (3) Racks, (C-7 Thru C-9) Lot-(12) Black Upholstered Office Stack Chairs, (Training Room) Furniture in (1) Room, (Main) Lot-Laptops, Keyboards and Mice, (Not in Service), (Main) Lot-Furniture and Computer in (1) Room, (Main) Vertical Air Receiving Tank, (Bldg. 3) Lot-(6) Mitutoyo Absolute 6"/150mm Digital Calipers, (Bldg. 1 Mitutoyo Absolute 6"/150mm Digital Caliper with Case, (Bldg. 1 Lot-Misc. on Floor and on Shelving in (1) Storeroom, (No Electrical, Lot-Servers and Components on (2) Racks, (IT Room) 5' x 12' Conference Table with (10) Chairs, (Main) Lot-Shelving in (1) Room, (Contents Not Included), (QC Room) Hewlett Packard Designjet T610 Plotter with Computer and Supplies, Lot-Stands and Scrap, (E-13) Mitutoyo 6-Piece Micrometer Set with Wood Case, (Bldg. 1 Wilson Rockwell Model 4OUR, Bench Top Hardness Tester, Brown & Sharpe Model Micro Xcel 765, Coordinate Measuring Lot-(1) 12-Drawer Tooling Cabinet with Contents and Tooling on Lot-Furniture in (4) Office, (Kyocera Copier Not Included), (C-13) Lot-Furniture and Monitors in (1) Office, (Main) Lot-Steel and Aluminum Stock in (3) Racks, (D-2) Mitutoyo IP65, 0-1" Digital Micrometer with Case, (Bldg. 1 Inspection) Lot-(1) Mitutoyo 8"/200mm, (1) 6"/150mm Digimatics and (1) No Lot-Stands, (E-14 Thru E-15) Lot-Roller Feed Conveyors, (D-11) Mitutoyo Gage Block Set, (Bldg. 1 Inspection) Lot-(1) Snap-On 1/4" Drive and (1) Proto 3/8" Drive Torque Wrenches Lot-Furniture, Computer and Printer in (1) Office, (D-9) Lot-Refrigerator, Microwave, Desk, Stand and Fixture, (D-18) Lot-File Cabinets, Table, Chair, Bench Scale, etc. with Contents, (E-6) Big Joe Model 6256S, 2,500-Lbs. Capacity Electric/Hydraulic Lever 6-Drawer Organizer Cabinet with Ring Gages Contents, (Bldg. 1 DoAll Gage Block Set, (Bldg. 1 Inspection) Lot-(3) Packaged Setup Block Sets, (Bldg. 1 Inspection) 3-Drawer Pin Gage Cabinet Set, (Bldg. 1 Inspection) VIS 12-Piece Micrometer Set with Wood Case, (Bldg. 1 Inspection) Powermatic Model 1150, 15" Floor Standing Drill Press, S/n 4-4589-1, Lot-Die Fixture Plates with (1) Rack, (C-14) Baldor 8107W, 8" x 3/4-HP Double End Bench Top Grinder with Stand, Lot-Various Stack Chairs in (5) Stacks, (Start of Sale Room) Lot-(10) Black Upholstered Office Stack Chairs, (Training Room) Paper Cutter with Stand, Organizer and Desk, (Main) Lot-Furniture, Computer and Brother Fax Machine in (1) Office, Lot-Furniture, Computers, and Printers in (1) Office, Kyocera Copier Lot-Maintenance Contents on Shelving Unit, with Shelving and No Name Approximately 1,000-Lbs. Capacity Foot Operated Mitutoyo Digital Depth Micrometer with Inside Mic's, (Bldg. 1 Chuan Brand 5-Piece Micrometer Set with Cases on (1) Shelf, (Bldg. Pax Cam 3, Stereo Electronic Microscope with Light Source and Lot-Cylinders on (5) Steel Die Tables, (Tables Included), (C-15) Lot-Furniture and TV in (1) Office, (Main) Lot-(12) HON 4-Drawer File Cabinets in (1) Row, (Main) Lot-Furniture in (1) Office, (Kyocera Copier Not Included), (Human Lot-Balance of Items on Floor on One Side of the Room, (No Items Lot-1-2-3 Honeycomb Setup Blocks in (1) Box, (Bldg. 1 Inspection) Lot-Small V-Blocks in (1) Box, (Bldg. 1 Inspection) Starrett No. 25-881, Dial Force Indicator in Box, (Bldg. 1 Inspection) SPI No. 24-309-7, Dial Force Indicator in Box, (Bldg. 1 Inspection) Baldor 1/3-HP Motor with 5" 3-Jaw Chuck, Pedestal Based, (D-19) Lot-Computer Repair/Maintenance on (2) Sections Shelving, (IT Lot-(1) Canon and (1) HP Printers, (Main) Lot-Power Strips and UPS Units, (Main) Lot-Refrigerator, Freezer, Microwave, Floor Protectors and Furniture Lot-First Aid Supplies and Wheelchair in (1) Room Lot-Furniture, Fax Machine, Brother Printer and Dylis Room Air Lot-Shelving and (2) Cabinets, (B-5) Lot-Heat Buster 42" Drum Fan and (1) Pedestal Shop Fan, (Bldg. 2 Kysor Johnson Model J, Horizontal Metal Cutting Band Saw, Clausing Model 2286, 20" Table Type Drill Press, S/n 513734, (Not 12" x 18" x 3" Black Granite Surface Plate, (Bldg. 1 Inspection) Lot-Fixtures and Setup on (4) Sections Shelving in (1) Row, (Shelving Lot-(11) 38" x 38" Steel Die Fixture Tables, (E-12) Taylor-Winfield Model ENE-24-75, 75-KVA Seam Resistance Lot-Contents of (2) Storerooms, (Training Room) Lot-Desks, File Cabinets, Tables and Storage Cabinet in (1) Room, Lot-Various Computers, (Not in Service), (IT Room) Lot-(9) HON 4-Drawer File Cabinets in (1) Row, (Main) Lot-Document Shredder, Heater, Display and Waste Baskets, (Main) Lot-Office Appliances on (1) Section, (Main) Lot-Hole Punches, Pencil Sharpeners, Scissors, Staplers and Misc. Lot-Furniture in (2) Offices, (A-1) Lot-Radius Gages in (1) Box, (Bldg. 1 Inspection) Lot-(1) Scherr Tumico Depth Micrometer and (1) Angle Gage Block Allen Bradley Micrologix 1400 Portable Test Kit, (Bldg. 1 Inspection) Brady BMP41, Portable Electronic Label Printer with Case, (Bldg. 1 Lot-(1) Mitutoyo 0-20mm External Thickness Point Dial Caliper Gage, Scherr Tumico 0-1" Deep Throat Micrometer with Case, (Bldg. 1 Fowler 0-1" Digital Micrometer, (Bldg. 1 Inspection) Mitutoyo Digimatic 12"/300mm Digital Caliper, (Bldg. 1 Inspection) Mitutoyo Digimatic 24"/600mm Digital Caliper, (Bldg. 1 Inspection) Starrett No. 721, 24" Digital Caliper with Case, (Bldg. 1 Inspection) Fowler 24"/600mm Digital Caliper with Case, (Bldg. 1 Inspection) Brown & Sharpe Bench Type Micrometer, (Bldg. 1 Inspection) Mitutoyo HDS Absolute Digimatic 24" Digital Height Gage, (Bldg. 1 Lot-Cylinders on (5) Steel Die Tables, (Tables Included), (C-14) Lot-(2) Miller Invision 354MP, 300-Amp Capacity DC Inverter Arc Lo-Calculators, Tape Shooter, Printer, Binder Machine, Typewriter, Lot-Asst'd Office Supplies in (4) Boxes Lot-Office supplies, Bubble Wrap and Binders, (Main) Factory Cat Model 40, Sit Down Ride On Electric Floor Sweeper, Lot-Indiator Stand Parts in (2) Boxes, (Bldg. 1 Inspection) Lot-(14) Magnetic Indicator Stand Bases in (1) Box, (Bldg. 1 Lot-(1) Double Beam and (1) Triple Beam Lab Scales, (Bldg. 1 Superior Signal AccuTrak VPE-1000, Ultrasonic Digital Inspection SPI No. 14-796-7, Digital Force Indicator in Box, (Bldg. 1 Inspection) Lot-(11) Various Mfg. 0-1" and 1-2" Micrometers, (Bldg. 1 Inspection) Mitutoyo 0-1" Digital Micrometer with Case, (Bldg. 1 Inspection) Lot-(1) Brown & Sharpe 12"/30cm and (1) Fowkler 12"/300mm Digital SPI 24" Digital Height Gage, (Bldg. 1 Inspection) Fowler 6"/150mm Digital Height Gage, (Bldg. 1 Inspection) Genesis Chassis with Panasonic PanaRobo Robot, Lot-Miller Invision 354MP, 300-Amp Capacity DC Inverter Arc NEC Neax 2000 IPS Internet Protocol Server, (IT Room) Lot-Cabling, Keyboards, etc. in (2) Boxes, (IT Room) Lot-Printers on Desk Top and Floor, (IT Room) Lot-(9) Monitors on (1) Table, (IT Room) Lot-Monitors on (1) Cabinet and Table, (IT Room) Lot-(2) Canon Fax Machines, (IT Room) Lot-(6) HON 4-Drawer File Cabinets in (1) Room, (Main) Lot-Furniture and Computer in (1) Office, (Built-In Furniture Not Lot-Furniture in (1) Office, (Built-In Furniture Not Included), (Main) Lot-(4) Black Office Chairs, (6) File Cabinets, Table and Planter, Lot-Furniture and File Cabinets in (1) Room, (Main) Lot-Furniture and Granite Plate in (1) Office, (Main) Lot-File Cabinets and Furniture in (1) Office, (Main) Lot-(8) HON 5-Drawer and (4) 4-Drawer File Cabinets in (1) Row, Lot-3-Piece Wall Bookcase Unit and Office Chairs, (Main) Lot-Desk Lamps and Organizer Trays on Cabinet Top, (Main) Lot-Furniture in (1) Room, (Main) Lot-File Cabinets and Desks in (1) Room, (Contents Not Included), Lot-Furniture in (1) Office, (Human Resource Group) Lot-Furniture in (1) Office, (No Manuals), (C-3) Lot-Furniture in (1) Office, (C-6) Lot-Furniture, Computers, and Printers in (2) Offices, (Shipping (E-6) Lot-Barrier Curtains and (1) Storage Cabinet, (A-14) Lot-Stands and Carts, (E-13 Thru E-14) Lot-Roller Feed Conveyors, (D-12) Lot-Plastic Dunnage Pallets (E-12) Lot-Floor Mats on (1) Pallet, (D-11) Lot-Shipping Station with Hopper Stand, (Scale Not Included), (D-11) Lot-(9) Pallet Riser Decks, (D-11) Shipping Station with Roller Feed and (2) AND 100-Lbs. and (1) Shipping Station with Roller Feed and AND 100-Lbs. Digital Bench Dustkop Dust Collector, S/n N/a, (D-4) SteelTrak Disharge Conveyor, (D-2) Lot-Misc. in (1) Row Along (1) Wall, (D-2) Grieve Model NT-800, 2-Door Industrial Oven, S/n N/a, 3000-Watts Johnson Lab Oven, (D-2) Balance of Furniture in Tool Room Offices, (Bldg. 2) Reinhoff Parts Washer, Outside, (Bldg. 3) Lot-Pallets Outside, (Between Bldg. 2 & 3) A-Frame Gantry Crane, Portable, (Hoist Not Included), Outside, Lot-Tables and Chairs in Breakroom, (Bldg. 2) Lot-Contents of (4) Rooms, (No Riehl Tensil Testing System), Lot-Contents of (3) Rows, (Bldg. 2) Lot-(54) Steel Gaylord Tubs, (Bldg. 2) Lot-Fixtures, Shelving, etc. in (1) Room, (Bldg. 2) Lot-Misc. in Gaylord Cardboard Boxes on the Racks and in the Rows, Lot-Misc. in (10) Rows, (Hydrualic Unit Not Included), (Bldg. 2) Lot-(11) Sections Pallet Racking, (Contents Not Included), (Not to Be Lot-Contents of (6) Sections Racking, (Racking Not Included), Lot-Contents of (3) Sections of Racking, (Racking Not Included), Lot-Steel Die Fixture Plates with Rack, (Bldg. 2) Lot-Machinery, Fixtures, Tank, etc. in (1) Area, (Bldg. 2) Hydrualic Unit, (Bldg. 2) Stokes Model 72650, Up Acting Molding Press Operation, S/n Lot-Steel Stock with (3) Racks and Misc. Along (1) Wall, (Bldg. 2) Lot-(1) Lewis Machine Co. No. 10-F, Travel Cut Machine, (2) Pass Lot-Coil Stands, (Bldg. 2) 60" Diameter Coil Unwinder Table, (Bldg. 2) Lot-(4) RMG Stock Handling Turntables, (Bldg. 2) Lot-Roller Conveyors, (Bldg. 2) Lot-(1) RMG Auto Draw Machine and (2) and (2) Various Machines, Lewis Machine Co. No. 8-F, Travel Cut Machine, (Bldg. 2) Lewis Machine Co. No. 10-F, Travel Cut Machine, (Bldg. 2) Hurricane Parts Pass Thru 16" Conveyor Type Parts Washer, (Bldg. 2) Lot-Dump Hopper and Shelving with Contents, (Bldg. 2 Toolroom) Columbian 6" Bench Vise with Bench, Stand and Cart, (Bldg. 2 KIP Model 2900 Blueprint Copier, (Bldg. 2 Toolroom) Lot-(20) Various Sections Pallet Racking, (Contents Not Included), Lot-Contents of (5) Sections Racking, (Racking Not Included), (Bldg. 3) Lot-Contents of (3) Sections, Racking (Racking Not Included), (Bldg. 3) Lot-Contents of (6) Sections Racking, (Racking Not Included), (Bldg. 3) Lot-Press Dies with Rack, (Bldg. 3) Brown & Sharpe No. 2, OD Grinder, (Not in Service), (Bldg. 3) Lot-(3) Welding Enclosures in (1) Row, (Not in Service), (Bldg. 3) Lot-(3) Various Machines in (1) Row, (Not in Service), (Bldg. 3) Quincy Skid Mounted Rotary Screw Air Compressor, (Not in Service), Joy Twistair Model 240, Rotary Screw Packaged Air Compressor, Pneumatech Model AD750, Refrigerated Compressed Air Dryer, Kaeser Model TF171E, Rotary Screw Packaged Air Compressor, Speedaire 5-HP Vertical Tank Mounted Air Compressor, (Not in 36" x 30" 2-Hole Dry Shot Blast Cabinet, (Not in Service), (Bldg. 3) Clausing Model 2287, 20" Table Table Drill Press, S/n 521879, (Not Grob Model 4V-18, 18" Vertical Contour Metal Cutting Band Saw, DoAll G-10, 8" x 24" Surface Grinder, S/n G1-511457, (Not in Service), Coil Handling Equipment Model 4R-24, 24" Wide x 60" Diameter No Name Double End, Magazine Feed, Thread Roller Machine, S/n Balance of Machine Parts and Conveyor in (1) Row, (Bldg. 3) Shuster Wire Straightening and Cutting Machine, S/n N/a, (Not in Lot-Misc. in (1) Row, (Bldg. 3) Lot-Fixtures in (1) Row, (Bldg. 3) Lot-Plastic Totes and Collapsable Tubs in (1) Row, (Bldg. 3) Lot-Plastic Totes in (1) Row, (Bldg. 3) Section Pallet Rack with Contents, (Bldg. 3) Lot-Contents of (1) Room, (Bldg. 3) Lot-Tooling with (2) Shelving Units, (Bldg. 3) Pangborn Dust Collector, (Buyer Must Cap the Wall Opening Water Lot-Pallets, (Bldg. 3) Lot-Cardboard Boxes, (Bldg. 3) Lot-Collapsable Tubs in (1) Row, (Bldg. 3) Lot-(4) Various Transformers on (3) Pallets, (Not in Service), (Bldg. 3) Lot-(9) Asst'd Sections Pallet Racking, (Contents Not Included), (Not Lot-(7) Asst'd Sections 14'H Pallet Racking, (Contents Not Included), Lot-(8) Asst'd Sections 12'H Pallet Racking, (Contents Not Included), Lot-(7) Sections 10' x 28" x 14'H Pallet Racking, (Contents Not Lot-(3) Sections 10' x 28" x 14'H Pallet Racking, (Contents Not Lot-(3) Sections 10' x 54" x 14'H Pallet Racking, (Contents Not Lot-(10) Sections 10' x 54" x 14'H Pallet Racking, (Contents Not Lot-(7) Sections 10' x 54" x 14'H Pallet Racking, (Contents Not Lot-(4) Sections of Pallet Racking, (Contents Not Included), (Not to Lot-Contents of (4) Sections, (Must Take All of the Contents, No Lot-Contents of (7) Sections, (Must Take All of the Contents, No Lot-Contents of (16) Sections, (Must Take All of the Contents, No Lot-Contents of (3) Sections, (Must Take All of the Contents, No Lot-Plastic Totes in (1) Basket and (7) Pallets, (D-6) Lot-Machine Parts in (2) Sections, (Pallet Racking Not Included), (D-2) Lot-(96) Feet of Crib Fencing Including (2) Walk In Gates, (Contents Lot-(74) Sections Shelving and (4) Cabinet with Maintenance Support Lot-Cardboard Boxes and Divider Sheets in (2) Sections and (2) Lot-Contents of (8) Sections Pallet Racking, (Must Take All of the Lot-Contents of (10) Sections Pallet Racking, (Must Take All of the Lot-(45) Steel Gaylord Tubs, (E-14) Lot-(69) Steel Gaylord Tubs, (D-14) Lot-(49) Steel Gaylord Tubs, (D-13) Lot-(81) Steel Gaylord Tubs, (D-12) Lot-(70) Steel Gaylord Tubs, (D-12) Lot-(47) Steel Gaylord Tubs, (D-11) Lot-Press Dies on/with (7) Racks, (B-19 Thru C-19) Rice Lake Rough Deck 48" x 48" Free Standing Floor Scale Plate Kanawha 48" x 48" Free Standing Floor Scale Plate with AND 50kg No Name 48" x 48" Free Standing Floor Scale Plate with AND Wulftec Model WHP-200 C, Pallet Stretch Wrap Machine, 24" x 36" Mechanical Hand Crank Portable Lift Table, (D-8) 22" x 34" Mechanical Hand Crank Portable Lift Table, (D-8) 30" x 30" Foot Operated Portable Hydraulic Lift Table, (D-8) Hydraulic Pallet Jack, (D-8) 2-Ton Capaciy Portable Gooseneck Crane, (D-8) Hercules Approximately 1,000-Lbs. Capacity Foot Operated Hydraulic Presto Approximately 1,000-Lbs. Capacity Foot Operated Hydraulic Presto Model BTA8127-2000, 2,000-Lbs. Capacity Electric/Hydraulic 48" x 72" Diamond Plate Dock Plate, (D-9) Tennant Model J18150-T-M, 36-DC Volts x 150-Amp Capacity Industrial EnerSys EnForcer HF, Model EH3-12-1200, 24-DC Volts x 200-Amps EnerSys EnForcer HF, Model EH3-12-900, 24-DC Volts x 145-Amps Pull Behind Stock Wagon, Pneumatic Tires, (D-10) Hyster Model T5XT, Electric Ride On Tugger, S/n E142H02357Y, Hyster Model T5XT, Electric Ride On Tugger, S/n E142H01898V, Wesco Approximately 3500-Lbs. Capacity Hydraulic Pallet Jack, Yale Model MPB040-EN24T2248, 4000-Lbs. Capacity Electric Man-Lift Fork Lift Attachment, (D-8) 78" Fork Lift Boom Attachment, (D-8) 66" Fork Lift Boom Attachment, (D-8) 96" Fork Lift Boom Attachment, (D-8) 96" Extendable Fork Lif Boom Attachment with Clevises, (D-9) Barrel Grab/Transport Fork Lift Attachment, (D-8) Lot-Fork Lift Mast Guards on (1) Pallet, (D-8) Lot-Plug Gages in (1) Pallet Box, (Bldg. 1 Inspection) Lot-Fixtures with Shelving Unit and Setup Plates, (Bldg. 1 Inspection) Lot-Indicator Fixture Stands with Various Dial Force Gages on (1) Lot-Fixture Parts and Go Nogos in (2) Boxes and (1) Tool Box, (Bldg. Lot-Snap Gages in (1) Box, (Bldg. 1 Inspection) Lot-Plug Gages in (1) Box, (Bldg. 1 Inspection) Lot-Ring Gages in (2) Boxes, (Bldg. 1 Inspection) Lot-Setup in (3) Boxes and (2) Stands, (Bldg. 1 Inspection) Lot-Setup in (2) Boxes, (Bldg. 1 Inspection) Lot-(1) Anchor Stereo Microscope , Light Source, Mitutoyo Digimatic Pitch Diameter Set, (Bldg. 1 Inspection) Lot-(4) Starrett Dial Force Gages and (1) Wilson Wolpert Gage in (1) Mitutoyo Depth Micrometer, (Bldg. 1 Inspection) Lot-(2) Gage Block Sets, (Bldg. 1 Inspection) Dillon Dynamometer 10,000-Lbs. Capacity Scale, (Bldg. 1 Inspection) Roundness Checker, (Bldg. 1 Inspection) Roundness Checker with Federal Dial Force Indicator, (Bldg. 1 Roundness Checker with Starrett Dial Force Indicator, (Bldg. 1 Roundness Checker with Aerospace Dial Force Indicator, (Bldg. 1 Lot-(5) 12" Indicator Angle Plates, (Bldg. 1 Inspection) Lot-Various Inspection Items on Top Shelf, (Bldg. 1 Inspection) Lot-Fault Finder Kit, Setup, and Electronic Edge Finder in (2) Boxes, Lot-Various Mfg. Digital Calipers in (1) Box, (Bldg. 1 Inspection) Lot-Go Nogos in (2) Boxes, (Bldg. 1 Inspection) Lot-Go Nogos in (1) Service Kit, (Bldg. 1 Inspection) Lot-Feeler Thickness Gages in (2) Boxes, (Bldg. 1 Inspection) Lot-Standard V-Blocks in (1) Box, (Bldg. 1 Inspection) Lot-(3) Large Magnetic V-Blocks in (1) Box, (Bldg. 1 Inspection) Lot-Magnetic Indicator Stand Bases in (1) Box, (Bldg. 1 Inspection) Lot-Various Dial Force Indicators in (2) Boxes, (Bldg. 1 Inspection) Lot-Hand Held Refractometers in (1) Box, (Bldg. 1 Inspection) Lot-Various Mfg. Digital Force Indicators in (1) Box, (Bldg. 1 Lot-(1) Raytek PM Plus Digital Infrared Thermometer and (1) Lot-(2) Check Line Digital Coating Thickness Testers, (Bldg. 1 Cole-Parmer Instrument Co. Digital RPM Gage with Case, (Bldg. 1 Omega Digital Calibrator/Thermometer with Case, (Bldg. 1 Inspection) ETG Electronic Thickness Gage with Case, (Bldg. 1 Inspection) Gage Fixture with Aerospace Dial Force Indicator Gage, (Bldg. 1 Mitutoyo 18" Digital Caliper with Gage Fixture, (Bldg. 1 Inspection) Fowler 24"/600mm Digital Caliper with Gage Fixture, (Bldg. 1 Mitutoyo Absolute 42" Digital Caliper with Gage Fixture, (Bldg. 1 Lot-(2) Drilled and Tapped Setup Layout Plates, (Bldg. 1 Inspection) Lot-Indicator Stands, (Bldg. 1 Inspection) Snap On Precise Torqometer, (Bldg. 1 Inspection) Lot-(2) SPI Absolute Digimatic 24" Digital Height Gages, (Bldg. 1 Lot-(2) Fowler 24" Digital Height Gages, (Bldg. 1 Inspection) Lot-(1) 36" and (1) 18" Standard Height Gages, (Bldg. 1 Inspection) Lot-(2) Camera Tri-Pods, (Bldg. 1 Inspection) Cleco Model P-15, Power Tool Torque Analyzer, (Bldg. 1 Inspection) Lot-(1) Snap-On 3/8" Drive, (1) 1/2" Drive and (1) Armstrong 3/8" Lot-(2) Snap-On 3/8" Drive and (1) Sturtevant Richmont 3/8" Drive Jetco D3-100F, 1/2" Drive Torque Wrench, (Bldg. 1 Inspection) CDI 2503LDFNR, 1/2" Drive Torque Wrench with Craftsman CDI 3504LDFN, 3/4" Drive Torque Wrench, (Bldg. 1 Inspection) Lot-Loose Pin Gages and (1) .061 - .250" Pin Gage Set on (1) Shelf .626 - .750" Pin Gage Set, (Bldg. 1 Inspection) .501 - .625" Pin Gage Set, (Bldg. 1 Inspection) .251 - .500" Pin Gage Set, (Bldg. 1 Inspection) .2510 - .5000" Pin Gage Set, (Bldg. 1 Inspection) .061 - .250" Pin Gage Set, (Bldg. 1 Inspection) .0610 - .2500" Pin Gage Set, (Bldg. 1 Inspection) 4-Drawer Pin Gage Cabinet Set, (Bldg. 1 Inspection) 4-Piece Various Mfg. Micrometer Set in Wood Case, (Bldg. 1 Lot-(6) Various Mfg. 0-1" Micrometers, (Bldg. 1 Inspection) Lot-4-Piece Set No Name Micrometers, 0-1", 1-2", 2-3" and 3-4", Lot-(2) Mitutoyo and (2) No Name Various Micrometers on (1) Shelf, No Name 6-7" Micrometer with Case, (Bldg. 1 Inspection) Mitutoyo 0-1" Digital Micrometer, (Bldg. 1 Inspection) Starrett No. 436, 10-11" Micrometer with Case, (Bldg. 1 Inspection) Lot-(3) Various Mfg. 12" Dial Calipers, (Bldg. 1 Inspection) Mitutoyo 150mm Dial Caliper with Case, (Bldg. 1 Inspection) Mitutoyo Absolute Digimatic 12"/300mm Digital Caliper, (Bldg. 1 Fowler 24"/600mm Digital Caliper, (Bldg. 1 Inspection) No Name 24"/610mm Digital Caliper with Case, (Bldg. 1 Inspection) DoAll Model DHM-13, Height Master, (Bldg. 1 Inspection) Mitutoyo 12" Height Master, (Bldg. 1 Inspection) Scherr Tumico 18" Height Gage, (Bldg. 1 Inspection) No Name 12" Digital Height Gage, (Bldg. 1 Inspection) No Name 24" Dial Height Gage, (Bldg. 1 Inspection) Lot-(1) "My First Lab" 10x Digital Microscope and (1) Titan 20x DoAll 18" x 18" x 4" Black Granite Surface Plate, (Bldg. 1 Inspection) DoAll 12" x 18" x 4" 2-Ledge Black Granite Surface Plate, (Bldg. 1 Lot-(2) 12" x 18" x 3" and (1) 6" x 6" x 2" Black Granite Surface Plates, 18" x 24" x 3" Black Granite Surface Plate, (Bldg. 1 Inspection) Lot-(1) 18" x 24" x 2 1/4" and (1) 18" x 24" x 2 1/4" 2-Ledge Black DoAll 24" x 36" x 4" Black Granite Surface Plate with Steel Stand, 24" x 36" x 4" Black Granite Surface Plate with Steel Stand, (Bldg. 2 Riehle 60,000-Lbs. Capacity Tensile Tester Machine, S/n R-64150, Brown & Sharpe Model Mxcell 765, Coordinate Measuring Machine, Jones & Lamson Model TC-14, 14" Floor Standing Optical Misawa Seiki Bench Top Hardness Tester, S/n 651011, with Newall 40" Linear Scale with Newall DP700 Digital Readout, Portable Kaeser Model CS91, 75-HP Rotary Screw Packaged Air Lot-Fixtures, with Cabinet, Lockers and File Cabinet in (1) Row, (D-16) Genesis Welding Cell with Fanuc Arc Mate 50iL Robot, S/n N/a, Lot-Wissota 6" x 1/4-HP Double End Bench Top Grinder with Wilton Lot-Tooling and Setup with (2) Shelving Units, (C-19) Lot-Tooling with (8) Shelving Units, (D-19) Lot-Tooling and Setup with (1) Shelving and (1) Organizer, (D-19) Lot-Tooling and Setup with Rack and Cart, (E-19) Lot-Tooling with Racks in (1) Row, (No Chargers, Hyster Tugger or Lewis Model 10-C, 5/8" Wire Straightening and Cutting Machine, No Name Rod Bender Four Slide Machine, with Reeves Model 6000 Motion Industries 500-Gallon Capacity Hydraulic Unit, S/n B10762, Hill Acme Model 1 1/4, 1.25" Upsetter, AB Control Panel, Auto Load, Hill Acme Model 2, 2" Upsetter, AB Control Panel, Auto Load, Feed Hill Acme Model 14, 1 1/4" Upsetter, AB Control Panel, Auto Load, Lot-Fixtures and Setup on (9) Sections Shelving in (1) Row, (Shelving Lot-Fixtures and Setup on (2) Sections Shelving in (1) Row, (Shelving Lot-Fixtures and Setup on (11) Sections Shelving in (1) Row, (Shelving Lot-Fixtures and Setup on (10) Sections Shelving in (1) Row, (Shelving Lot-Setup Blocks on (4) Shelves, (B-15) Lot-Angle Plates on (1) Shelf, (B-15) Lot-Angle Plates on (2) Shelves, (B-15) Lot-Cylinder Protection Caps on (1) Section, (Shelving Not Included), Lot-Cylinders and Setup on (1) Shelf and (2) Pallets, (B-15) Main Hydraulic System for Bending Station Operations, Consisting Lot-(2) Hydraulic Manifolds and (3) Hydraulic Stations, (C-14 Back Side) Lot-(2) Hydraulic Manifolds and (4) Hydraulic Stations, (A-15) Lot-(2) Hydraulic Manifolds and (4) Hydraulic Stations, (A-14) Lot-(2) Hydraulic Manifolds and (4) Hydraulic Stations, (A-13) Lot-(1) Hydraulic Manifold and (3) Hydraulic Stations, (B-13) Lot-(2) Hydraulic Manifolds and (4) Hydraulic Stations, (B-13) Lot-Die Fixture Plates on (4) Pallets and (2) Short Racks, (D-13) Lot-Die Fixture Plates with (1) Rack, (D-13) Lot-(1) Horizontal Air Receiving Tank with (2) Stands, (C-15) Lot-Motors, etc. on (8) Pallets, (C-15) Lot-Light Curtain Components on (1) Pallet, (C-15) Lot-Cylinders on (1) Pallet, (C-15) Lot-Cylinders and Setup on Steel Layout Table, (Table Included), Pittsburgh Compact Manual Bender Operation Steel Die Table, (A-16) Custom Fabricated Bending Operation Steel Die Table, (Cylinders Custom Fabricated 2-Cylinder Hydraulic Bending Operation on Steel Custom Fabricated 6-Cylinder Hydraulic Bending Operation on Steel Custom Fabricated 1-Cylinder Hydraulic Bending Operation on Steel Custom Fabricated 3-Cylinder Hydraulic Bending Operation on Steel Custom Fabricated 4-Cylinder Hydraulic Bending Operation on Steel Custom Fabricated 5-Cylinder Hydraulic Bending Operation on Steel Custom Fabricated 7-Cylinder Hydraulic Bending Operation on Steel Lot-(19) Gaylord Steel Tub Stands, (D-11) Lot-(19) Gaylord Steel Tub Stands, (C-16) Lot-(7) Gaylord Steel Tub Stands, (A-13) Lot-(9) Gaylord Steel Tub Stands, (A-13) Lot-(5) Gaylord Steel Tub Stands, (A-13) U.S. Industries Model Torc-Pac 60, 60-Ton Capacity Open Back U.S. Industries Model 60T640-306, 60-Ton Capacity Open Back Warco Model 100-2-48C, 100-Ton Capacity Straight Side Single Verson Model C2-150-48-36T, 150-Ton Capacity Straight Side Warco Model 300-2-60E, 300-Ton Capacity Straight Side Press, Bliss ModelS2-500-60-48, 500-Ton Capacity Straight Side Double Lot-(2) Sections of Shelving with Scrap Parts Contents, (C-12) Lot-Tubular Constructed Roller Conveyor, (2) File Cabinets, Portable Lot-Fixtures etc. on/with (8) Shelving Units, (1) Cart and (1) Pallet, No Name Drum Mounted Parts Washer Tank, S/n N/a, (A-11) Lot-Sink Station and Acid Storage Cabinet, (A-10) Buehler Bench Top Abrasive Cutoff Saw, S/n N/a, (A-10) Lot-(2) Partial Spools of Mig Welding Wire, (B-11) Lot-(3) Partial Drums of Mig Welding Wire, (B-11) Partial Drum of Mig Welding Wire, (B-11) Lot-(2) Partial Drums of Mig Welding Wire, (B-11) Welding Enclosure with Wilton 4" Machinist Vise, (3) Fans, (A-12) Lot-(2) Esab Mig 320 Arc Welding Power Sources, S/n's 0032220140 Lot-Powcon 400SM Arc Welding Power Source, S/n N/a, (2) L-Tec Lot-(2) Powcon 400SM Arc Welding Power Sources, S/n's N/a, (2) Lot-(1) Miller Invision 456MP, 450-Amp Capacity, (1) 354MP, Lot-(2) Miller Delta 302, 300-Amp Capacity, CV DC Arc Welding Lot-(2) Miller Axcess 300, 300-Amp Capacity Arc Welding Power Lot-Miller Axcess 300, 300-Amp Capacity Arc Welding Power Source, Lot-Miller CP-302, 300-Amp Capacity CV DC Welding Power Source, American Industrial Equipment Corp. Model BU30, 30-KVA Rocker