Food & Beverage Auction at the MDG Auction Showroom in Pittsburgh- Surplus to World's Largest Packaging Companies Hosted by M. DAVIS GROUP, LLC on 2019-08-07 08:00:00 EST in Pittsburgh Pennsylvania United States Complete lots list (current bid high to low)Modern Packaging 4-Wide Cup Filler, SN MP637, with Yogurt & Milk Nozzels, 2012 Multivac H050 Handling Module, SN 158611, 208/120V, 60Hz, 3 Phase. This space saving machine Modern Packaging 4-Wide Cup Filler, with Yogurt & Milk Nozzels, ~12- Cups Per Minute, Set Up to NEW 2012 Multivac H050 Handling Module, SN 158614, 208/120V, 60Hz, 3 Phase. This space saving NEW 2012 Multivac H050 Handling Module, SN 158612, 208/120V, 60Hz, 3 Phase. This space saving BULK BID: 2012 Altamat Verpackungsmaschinen GmbH Sandusweg 17 VFFS, Type: SVKL-300-S-H AND S/S Scale Stephan S/S VCM, M/N VM 300, S/N 723.288.01, 220 Volts, 60 Hz, Mounted on S/S Frame, with S/S Panel, Groen 100 Gallon S/S Steam Jacketed Kettle, Model DN/TA-100, S/N 54606-1, with Bottom Inside Lee 150 Gallon Steam Jacketed S/S Kettle, S/N A1133 with Bottom Side Scrape Surface Agitator with Multivac M855-EPC Rollstock Thermoforming Machine, SN 1187/100, with Bell Mark Code Dater, (2) Tennant Sit-Down Floor Scrubber, M/N 8300, S/N 8300-7311, 36 Volt Battery, Truck Weight 6760 ( Prodo-Pak 8-Head Pouch Filler, with Infeed Film Station, with Control Adjustments (Rigging & Loading MTC 3,000 lb. S/S Dual Motion Blender, M/N SC-3000, S/N 10188, with (2) Drives, with Hydraulic Lid MTC 3,000 lb. S/S Dual Motion Blender, M/N SC-3000, S/N 10187, with (2) Drives, with Hydraulic Lid Prodo-Pak 4-Head Pouch Filler, M/N 601-TW8, S/N 968, with Infeed Film Station, with Control BULK BID ITEM #45 TO ITEM #60: 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, with BULK BID: 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, with Plastic Lid, Aprox. S/S Aprox. 100 Gallon Breddo Likwifier, with Bottom Mounted Motor, Mounted on S/S Legs with Hinge S/S Aprox. 100 Gallon Likwifier, with Bottom Mounted Motor, Mounted on S/S Legs with Hinge Lid ( 2012 Altamat Verpackungsmaschinen GmbH Sandusweg 17 VFFS, Type: SVKL-300-S-H, S/N 012-002, with Mueller 2-Compartment 500 Gallon S/S Jacketed Flavor Tank, S/N 301421-1, with (2) Top Mounted Doboy Mustang IV Flow Wrapper, S/N 96-19004, 220 Volts, 3 Phase, with Aprox. 106" L S/S Infeed, Weigh Pak VFFS, M/N VERTEK, S/N 3181, 208/240 Volts (NOTE: Previously Ran Peanuts in 4 Oz. Bags) (** Vortron Single Rack Smoke House, with One Rack & Smoke Generator, 240 Volts, 3 Phase, 60 Hz (NOTE: Multivac MR Series Labeler, in working condition. (***NEP/LOCATED IN MISSOURI***) Cherry Burrell 5,000 Gal. S/S Horizontal Single Wall Tank, M/N HC, Equipped with Horizontal Groen 350 Gallon S/S Kettle, with Top Mounted Agitation, Mounted on S/S Legs, Internal Dims.: Aprox. Kaps All Bottle Cleaner, Model AC-12, SN 1628, Single Phase, Groen 150 Gallon S/S Kettle, M/N DN/TA-150, MAX. W.P. 45 PSI @ 300 F, NAT'L BD Number: 99129, with Cherry Burrel Aprox. 75 Gal Hinged Lid S/S Processor / Kettle, SN E-458-90, with Dual Motion Cherry-Burrell 500 Gallon S/S Batch Pasteurizer, M/N WPDA, S/N 500-76-3708, Mounted on S/S Legs, Ulma Taurus Tray Sealer, M/N 570N, S/N 721 0060, Capable of Trays Listed Below:Description:Ulma Mueller 2-Comparment 500 Gallon S/S Jacketed Flavor Tank, S/N 301421-1, with (2) Top Mounted Ingersoll Rand Air Compressor, Model UP6-15CTAS-125W/D, 3 Phase, Ideal for Small Packaging Plant Crepaco 550 Gallon S/S Jacketed Tank, S/N C8652, Heat Exchange Jacket 50 PSIG, with CIP Spray Groen 80 Gallon S/S Kettle, M/N AH-80, NAT'BD #: 37444, MAX. W.P. 30 PSI @300 F (Rigging & Loading Day S/S Ribbon Blender, with 1.5 hp Pacemaker Drive, 1735 RPM, Blending Compartment Dims.: Aprox. Watson / OCS Aprox. 30 Gal. Portable Pressurized S/S Reactor Tank, SN 2342-2, MAWP 100 Psi @ 350 LittleFord Jacketed Polyphase Mixer, M/N FM-300-5, S/N 41145-3738, Vortron Single Rack Smoke House, with One Rack & Smoke Generator, 240 Volts, 3 Phase, 60 Hz Vortron Single Rack Smoke House, with One Rack & Smoke Generator, 240 Volts, 3 Phase, 60 Hz (*** Enviro-Pak Single Rack Smoke House, with One Rack & Smoke Generator, M/N CVU-490E, Series Mini- Paxall Package Sealer, M/N V22MA8C, S/N 1001, 200 Volts, 3 Phase, with Aprox. 24" W Inlet/Outlet Hayssen VFFS, M/N 12-16HR, S/N X17319, 115 Volts, 1 Phase (Rigging & Loading Fee $250.00) (Located 2010 Adept Quattro Parallel Robot, M/N s650H, Robot ID: 721-00321, Single Phase, 200-240 VAC, 2010 Adept Quattro Parallel Robot, M/N s650H, Robot ID: 721-00304, Single Phase, 200-240 VAC, Crepaco 3-Barrel S/S Ice Cream Freezer, S/N D-4645-W3126, with Gauges and Valves, Includes Some St. Regis 2-Barrel S/S Ice Cream Freezer, S/N KRM240-3102, with Gauges and Valves, Includes Some S/S Scale System, with (8) Velocity Shaker Stations, Mounted on S/S Frame (Rigging & Loading Fee $ Damnrow 150 Gallon S/S Jacketed Tank, with Top Mounted Agitation, Internal Dims.: Aprox. 43" Dia. Lee 50 Gallon Jacketed Kettle, S/N 715-S, Equipped with Top-Mount Sweep Scrape Agitation, 1-1/2 S/S COP Wash Trough, Internal Dims.: Aprox. 135" L x 16" W x 11" D, with 5 hp Centrifugal Pump, 3450 Palace Packaging Parallel Orienting Belt Assembly, M/N D-4-PR5/H-25, S/N 5008, 120 Volts, 1 Phase, S/S Omega Unscrambler, M/N 3D-ST, S/N 93.J16164, with Allen Bradley SLC 500 Control in Mounted S/S Omega Unscrambler, M/N 3D-ST, S/N 04-J343000, with Allen Bradley MicroLogix 1000 Control in 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-6, with Plastic S/S Cone-Bottom Jacketed Kettle, Aprox. 70" Dia. x 16" Deep, with Agitation Motor, (2) S/S Hinge CFM Industrial Vacuum System, Model 3508W, S/N 10AF009, 440V 3 Phase (W800) (Rigging & Loading CFM Industrial Vacuum System, Model 3508W, S/N 00AF456, 440V 3 Phase (Rigging & Loading Fee $125.00) NEW Aget Double Chamber Hoppers, Overall Dims.: Aprox. 60" L x 36" W x 38" H (Rigging & Loading 2009 Manesty 16-Head Rotary Tablet Press, M/N D3B, S/N 4D173, with Start/Stop Switch (Rigging & 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-36, with Plastic 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-3, with Plastic 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, with Plastic Lid, Aprox. 49" W x 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-24, with Plastic 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-5, with Plastic 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-21, with Plastic 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-10, with Plastic 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-2, with Plastic 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-4, with Plastic 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-11, with Plastic 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-34, with Plastic 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-9, with Plastic 2013 Loos Portable S/S Round Column Dump Tote, Model 1121-001, S/N 1121-001-1212-17, with Plastic S/S Pitched Bottom Trough, Internal Dims.: Aprox. 8' L x 4' W x 30" Deep, with 4" Clamp Type Ampco 20 hp Centrifugal Pump, Model ASP225-2525-25, SN CC-59122-1-1, with 2.5" x 2.5" Clamp Type Ampco 20 hp Centrifugal Pump, Model ASP225-2525-25, SN CC-61941-1-1, with 2.5" x 2.5" Clamp Type S/S Mixer with Portable S/S Cart, with Baldor 10 hp Motor, 1760 RPM (Rigging & Loading Fee $150. Lightning S/S Mixer, M/N XL0-300BV, S/N 390685, with 3 hp Motor (Rigging & Loading Fee $150.00) ( EZ-TEC S/S Metal Detector, S/N 786-40, with Reject Arm, Product Opening Aprox. 25" W x 4-1/2" H, Kramer Tablet Debuster, M/N C810, S/N 3.400 Type E2000-750, 110-240 Volts, Aprox. 52" H with 2" 2010 Shell & Tube Skid Heat Exchanger, Model SPC3-PT-CS-HC-1237, with 2010 Spirax Sarco 53" L x Key S/S Blower System, M/N 4142-C-2, S/N 84-41249, with 15 hp Baldor Motor, 1760 RPM, 230/460 Volts, Jenson S/S 300 Gal. Jacketed Vertical Tank, S/N CRST-101-DR, with S/S Slope Bottom, Mounted on S/S LHE 310 Gal. S/S Jacketed Vertical Tank, M/N 310GAL.CJ, S/N 6564-1, with Bottom Half Dimple LHE 310 Gal. S/S Jacketed Vertical Tank, M/N 310GAL.CJ, S/N 6564-2, with Bottom Half Dimple K-Tron Portable Feeder System, S/N S200-87-074-F6 Day Portable Dual Mixer, S/N 86858, with 9"L x 7"W x 9"D Mixing Area, 2009 MTC 57"L Portable Powerbelt S/S Incline Conveyor Model: MTCB-24-4 2009 MTC 56"L Portable Powerbelt S/S Conveyor Model: MTCB-24-4 Meto Corp. 12'H Pneumatic Lift Station, Model M2310-10, S/N 6904, Robopac Portable Electric Stretch Wrapper, with Interstate Battery, with Remote Control (*** Deitz S/S Tablet/Capsule Counter, M/N TCA2-R, S/N M2012, 115 Volts (Rigging & Loading Fee $100. Hi-Speed Micromate Check Weigher, with Aprox. 8" W Conveyor (Rigging & Loading Fee $150.00) (Located Damark Shrink Tunnel, with Aprox. 19" W Conveyor Belt (Rigging & Loading Fee $75.00) (Located in Axon Axon EZ-Seal, EZ-100, S/N E-912165, 110 Volts, Mounted on S/S Stand (Rigging - Loading Fee $ CLI S/S Labeler, M/N UNI-300, S/N 190683GB, 50 PSI, 120 Volts, 1 Phase, with Aprox. 72" Conveyor, Janke and Kunkel Dispax-Reactor, Type DR3-6-6, S/N 164, 1.5" x 1.5" Threaded S/S Head, Reliance 5 Drive/Motor for IKA Works Dispax-Reactor, Type DR3-6A, S/N 0666, Reliance 7.5 hp, 3520 rpm, 230-460 Nothum Versa Coater Preduster / Breader, Model VC-40, S/N 45720705, with 40"W Belt & Enclosed Hood Nothum BP-40 Batter Applicator, Model BP-40, S/N 45680705, CFM Industrial Vacuum System, Model 3508W, S/N 00AF452, 440V 3 Phase (Rigging & Loading Fee $125.00) Allen Bradley InView S/S Digital Message Board, Cat 2706-P72CN1 (Rigging & Loading Fee $100.00) ( Vac-U-Max S/S Industrial Vacuum, Job. No. C.: 193974, Item Ident.: 43644, with 5 hp Motor (Rigging & NYB 2hp Blower, Type Compact GI Fan, Size 125-ALUM, Reliance 1725 rpm Motor, 208-230/460V 3 Phase, NYB 1 hp Blower, Type Compact GI, Size 116INIB, Reliance 3450 rpm Motor, 208-230/460V 3 Phase, 6" NYB .75 hp Blower, Type General Purpose Fan, Size 182 PLR, Reliance 1725 rpm, 208-230/460 V 3 Phase, S/S 20 hp Agitation Shaft, with Reliance 3500 RPM Motor, Aprox. 50" L Shaft (Rigging & Loading S/S Corrugated Caser, with Allen-Bradley 3-Input PLC, with Allen Bradley PanelView 600 Little David Case Sealer, with Top & Bottom Tape Units, with Guide Rails (Rigging & Loading Fee $ Linx Ink Jet Coder, M/N 4800, S/N BF108, with Ink Head (Rigging & Loading Fee $75.00) (Located in Linx Ink Jet Coder, M/N 6900 P692, S/N EH966, with Ink Head (Rigging & Loading Fee $75.00) ( Linx Ink Jet Coder, M/N 4900, S/N BZ160, with Ink Head (Rigging & Loading Fee $75.00) (Located in Linx Ink Jet Coder, M/N 4900, with Ink Head (Rigging & Loading Fee $75.00) (Located in Pittsburgh, VideoJet Ink Jet Coder, M/N 1710, S/N 17136003C19ZH, with Head and Mounted on S/S Portable Axon Axon EZ-Seal, EZ-100, S/N A-80353, 110 Volts, Mounted on S/S Stand (Rigging - Loading Fee $75. Southworth Pallet Lift, M/N ZLS2-35, S/N 78589-100/1241656-01, Internal Dims.: Aprox. 4' L x 4-1/ Omega Vibratory Feeder Meritech Cleantech Automatic Handwashing Station, Model 2000S / 4000S, Like NEW Floor Mounted 10 ft. L Roller Conveyor, with 7" W Rollers (***Located in Ft. Worth, TX) Tri-Clover S/S Flow Diversion Valve, M/N 762TR-227M-2-1/2-316L-1-2, with 2-1/2" Clamp Type Inlet/ 2" S/S Milk Meters, with Clamp Type Inlet/Outlet (W243) (Rigging & Loading Fee $25.00)(Located in COP S/S Wash Baskets, Internal Dims.: Aprox. 15" L x 15" W x 3" Deep (Rigging & Loading Fee - $25 COP S/S Wash Baskets, Internal Dims.: Aprox. 19" L x 15" W x 3" Deep (Rigging & Loading Fee - $25. Lot of Assorted S/S Fittings, Includes (6) 2" S/S Elbows, (1) 1-1/2" S/S Elbow, (3) S/S Clamps 1-1/ COP S/S Wash Baskets, Internal Dims.: Aprox. 15" L x 15" W x 3" Deep COP S/S Wash Baskets, Internal Dims.: Aprox. 19" L x 15" W x 3" Deep Anderson S/S 1-1/2" Flow Meter, M/N IZMAG032D000S0000, S/N 1045788, Clamp Type Inlet/Outlet ( WCB 2-1/2" S/S (4)-Air Valve Cluster with S/S Manifold, M/N VALVE 61C 2.5UT6, Clamp Type Inlet/ WCB 2" S/S (4)-Air Valve Cluster with S/S Manifold, M/N VALVE 61C 2.0" U T6, Clamp Type Inlet/Outlet Tri-Clover 2" S/S Air Valves, Clamp Type Inlet/Outlet (W223) (Rigging & Loading Fee $25.00)( 3-Door Control Panel, 9'10" L x 7' H x 18" Deep, Includes (4) Square D Altivar 58 VFDs, (3) Altivarn