KS Equipment Inc. - Online Only Auction

Hosted by Ashman Company Auctioneers & Appraisers, Inc on 2019-08-02 14:00:00 EST in Watsonville California United States

Complete lots list (current bid high to low)

(1) 1999 ULTRATECH ULTRA STEPPER 1500 MVS Wafer Stepper- 6" oblong Wafer, cognex, series 2 bridge,
(1) HARDINGE HLVH SUPER PRECISION LATHE-1.5 HP MOTOR, 3,000 RPM, 11" SWING OVER BED, 1 1/4"
(1) POLAR AIR PRV0150003 ROTARY SCREW COMPRESSOR- 15 HP MOTOR, HOURS- 2,272, VARIABLE SPEED, s/n-
(1) Polar Air PRV0150003 ROTARY SCREW COMPRESSOR-15 HP MOTOR, HOURS- 417, s/n-173214-EVO
(1) BALDOR 6" DUAL WHEEL GRINDER WITH HOFFMANN CART
(1) JET 14" CLOSED STAND BANDSAW
(1) KURT 6" ANGLE LOCK VISE
(1) JET 14” CLOSED STAND BANDSAW
(LOT) GRINDING WHEELS, DIAMOND WHEELS
(1) PACKARD PRECISION 3/4" DRILL PRESS
(1) DO ALL BLOCK GAGE SET
(2) (1) LEITZ (1) NIKON MICROSCOPES
(LOT) PIN GAGES, WIRE GAGES & 0 PLUGS
(LOT) MISC. FLEX COLLETS
(1) FEDERAL LAPMASTER FLATNESS GAUGE
(1) PARALLEL SET
(1) .061-.250 PIN GAGE SET
(1) SPI BLOCK GAGE SET
(1) BROWN & SHARPE BLOCK GAGE SET
(5) 36"x45' GRANITE SURFACE PLATES
(4) 36"x48" GRANITE SURFACE PLATES
(2) 36"x48" GRANITE SURFACE PLATES
(LOT) (3) SCOPE CARTS (1) SHOP CART
(1) 36"x48" TRUE STONE GRANITE SURFACE PLATE WITH ULTRATECH PARTS
(1) 1996 Ultratech Stepper 1500 Wafer Steppers-3,4,5,6 or 8" wafer size capable, large die exposure,
(1) 1992 Ultratech Stepper 1500 Wafer Steppers-3,4,5,6 or 8" wafer size capable, large die exposure,
(1) 1996 ULTRATECH ULTRA STEPPER 1500 MVS Wafer Stepper- 6" oblong Wafer, cognex, series 2 bridge,
(2) ULTRATECH 2244 UTS MACHINES (PARTS ONLY)
(2) (1) STARRETT 36"x48" PINK GRANITE SURFACE PLATE WITH CART (1) 18"x18" HM GRANITE SURFACE PLATE
(LOT) 9 RACKS WITH ULTRATECH PARTS-PNEUMATIC CONTROLLERS, COOLER PRISM CONTROLLERS, LOADER PARTS,
(LOT) 8 RACKS WITH ULTRATECH PARTS-OSCILLOSCOPES, LOADERS, FLOPPY DRIVES, AIR GAYGE ASSEMBLY,
(LOT) 9 RACKS WIYH ULTRATECH PARTS-MOTORS, FILTERS, GAUGES, CAPS, FUSES, POWER SUPPLIES, LIGHT
(LOT) 9 RACKS WITH ULTRATECH PARTS-SWITCHES, CIRCUIT BOARDS, FUSE BLOCKS, FRAMES, LOADER PARTS
(LOT) 9 RACKS WITH ULTRATECH PARTS-DRIVERS, INTERFACES, STEPPER MOTORS, CIRCUIT BOARDS, AMPLIFIERS
(1) 14'x40' CLEAN ROOM WITH ELECTRIC DOOR, LIGHTING, NEW A/C UNIT
(1) 6'x3' NEWPORT RESEARCH SERIES PLUS HIGH PERFORMANCE SEALED HOLE TABLE
(1) SIEMENS SPC500, (1) VEECO MS9 LEAK DETECTOR
(1) GRIMMER SCHMIDT M1405B COMPRESSOR-3,167 CFM, 95PSIG, 25HP MOTOR, S/N- 3Z2
(LOT) 4 PALLET RACKS WITH CONTENTS-COMPUTER PARTS, LARGE PUMPS, MAGNIFYING GLASSES, MOTORS, CARTS,
(1) R. HOWARD STRASBAUGH 6BA-3 LAPPING MACHINE- 26" FACE, 8" HOLDING RINGS, 39 1/4" RINGS, s/n 41-
(LOT) LARGE LOT OF RACKS WITH CONTENTS-MISC. HARDWARE, PVC, CASTORS, GAS LINES, SWITCHES
(1) 15x25' PAINT BOOTH WITH PAINT ACCESSORIES
5'x5' WELDING TABLE WITH VISE
(2) (1) MILWAUKEE LARGE ANGLE GRINDER (1) BLACK & DECKER HEAVY DUTY DRILL
(LOT) (1) VAN DORN HEAVY DUTY DRILL (2) JIG SAWS (1) CRAFTSMAN DRILL
(1) MAKITA 12" CHOP SAW
(1) 6" BELT, 12" WHEEL GRINDER
(LOT) DESK WITH CONTENTS- COMPUTERS & MONITORS
(LOT) MISC, ROUGHING ENDMILLS
(LOT) MISC, LARGE ENDMILLS
(LOT) MISC. TAPS,
(LOT) (2) KEY (3) KEYLESS CHUCKS
36"x36" GRANITE SURFACE PLATE WITH STAND (LOT) 3 SHOP TABLES, 2 SHOP CABINETS WITH CONTENTS
(LOT) (1) 36"x48"GRANITE SURFACE PLATE (1)
(1) 24"x36" GRANITE SURFACE PLATE WITH TABLE
(1) 24"x24" GRANITE SURFACE PLATE WITH STAND
(1) MITUTOYO PH-350 OPTICAL COMPARATOR-S/N- 7033
(1) SPITFIRE SP-888-36 PNLC Lapping Machine-s/n-7903-36PNLC-1738
(1) 1996 ACER AGS 1020 AFD SURFACE GRINDER-Overhead manual parallel dresser, 8x18" magnetic chuck,
(1) 1998 FADAL 3016 VERTICAL MACHINING CENTER- 7,500 RPM, 15 HP MOTOR CAT 40, 21 TOOL ATC, TABLE
(1) SHARP CNC MILL 3HP MOTOR, SONY DRO, WORKS ONLY AS MANUAL MILL
(1) 6" 3 JAW CHUCK WITH SPARE SOFT JAWS
(1) 3'x4' TRU-STONE GRANITE SURFACE PLATE WITH STAND
(1) DIAL INDICATOR STAN
(5) 36”x48” GRANITE SURFACE PLATES
(4) 36”x48” GRANITE SURFACE PLATES
(2) 36”x48” GRANITE SURFACE PLATES
(1) AGRICULTURAL SPRAYER ON TRAILER
(3) FILE CABINETS
(1) FIRE SAFE FILE CABINET
(1) 50 TON BOTTLE JACK
(1) SPOT COOL 3040 PORTABLE A/C UNIT
(LOT) CONTENTS OF RECEPTION ROOM- DESK, CHAIRS, COMPUTER, PRINTER, TYPE WRITER
(1) CONFERENCE TABLE
(1) FLAMMABLE CABINET
(LOT) CONTENTS OF SHIPPING DEPT. PAPER CUTTER, BAG SEALER, BUBBLE PACK, TAPE GUN, BENCHES, SCALE,
(LOT) 3) SCOPE CARTS 1) SHOP CART
(1) CANON LSF-500 WITH SHOP TABLE
(4) LAB BENCHES
(LOT) CONTENTS OF TABLE- OSCILLOSCOPES, METERS, INTERFACE CABLES, POWER SUPPLIES
(1) 36”x48” TRUE STONE GRANITE SURFACE PLATE WITH ULTRATECH PARTS
(1) T&B BLUE MACS PRESS
(2) 1) LEITZ 1) NIKON MICROSCOPES
(1) OLYMPUS MICROSCOPE
(1) VICKERS PHOTOPLAN MICROSCOPE
(1) 1996 Ultratech Stepper 1500 Wafer Steppers- 3,4,5,6 or 8” wafer size capable, large die
(1) 1992 Ultratech Stepper 1500 Wafer Steppers- 3,4,5,6 or 8” wafer size capable, large die
(1) 1999 ULTRATECH ULTRA STEPPER 1500 MVS Wafer Stepper- 6” oblong Wafer, cognex, series 2 bridge,
(1) 1996 ULTRATECH ULTRA STEPPER 1500 MVS Wafer Stepper- 6” oblong Wafer, cognex, series 2 bridge,
(2) ULTRATECH 2244 UTS MACHINES PARTS ONLY)
(LOT) CONTENTS OF ROOM- SHELVING, SHOP CABINET, BEARINGS, MOTORS
(2) 1) STARRETT 36”x48” PINK GRANITE SURFACE PLATE WITH CART 1) 18”x18” HM GRANITE SURFACE PLATE
(1) IAS ENVIRONMENTAL CLEAN BENCH
(5) LAB BENCHES WITH CONTENTS- MISC. HARDWARE
(LOT) SECURITY CAGE
(LOT) 9 RACKS WITH COMPUTER MONITORS
(LOT) 9 RACKS WITH ULTRATECH PARTS- PNEUMATIC CONTROLLERS, COOLER PRISM CONTROLLERS, LOADER PARTS,
(LOT) 9 RACKS WITH ULTRATECH PARTS- OPTICS, AIR GAUGES, BACK PLANES, ALIGNMENT UNITS
(LOT) 8 RACKS WITH ULTRATECH PARTS- OSCILLOSCOPES, LOADERS, FLOPPY DRIVES, AIR GAYGE ASSEMBLY, MISC.
(LOT) 9 RACKS WIYH ULTRATECH PARTS- MOTORS, FILTERS, GAUGES, CAPS, FUSES, POWER SUPPLIES, LIGHT
(LOT) 9 RACKS WITH ULTRATECH PARTS- SWITCHES, CIRCUIT BOARDS, FUSE BLOCKS, FRAMES, LOADER PARTS
(LOT) 9 RACKS WITH ULTRATECH PARTS- DRIVERS, INTERFACES, STEPPER MOTORS, CIRCUIT BOARDS, AMPLIFIERS
(LOT) 9 RACKS ULTRATECH PARTS- WIRE, POWER SUPPLIES, COMPUTERS, KEYBOARDS
(LOT) 5 LAB BENCHES WITH CONTENTS- TIMERS, COMPUTER SCREENS, MISC PARTS
(1) 14’x40’ CLEAN ROOM WITH ELECTRIC DOOR, LIGHTING, NEW A/C UNIT
(LOT) LARGE LOT OF ULTRATECH STEPPER PARTS AND CABINETS
(LOT) NIKON MICROSCOPE WITH SURFACE PLATE AND SHOP TABLE
(1) 6’x3’ NEWPORT RESEARCH SERIES PLUS HIGH PERFORMANCE SEALED HOLE TABLE
(1) TAYLOR HOBSON TALYROND 150 WITH CLEAN CABINET
(LOT) CARTS WITH CONTENTS
(1) SOLITEC SPINNER/COATER MACHINE
(LOT) 6 RACKS WITH CONTENTS- MOTORS, SWITCHES, WATT METERS, PROGRAMMERS, SPLITTERS, CONTROLLERS
(1) CLESTRA AT AC-1500 CHILLER UNIT, S/N-9004003
(1) SIEMENS SPC500, 1) VEECO MS9 LEAK DETECTOR
(1) BUSCH VACUUM PUMP WITH 60 GALLON TANK
(1) GRIMMER SCHMIDT M1405B COMPRESSOR- 3,167 CFM, 95PSIG, 25HP MOTOR, S/N- 3Z2
(LOT) 4 PALLET RACKS WITH CONTENTS- BARBED WIRE, POWER SUPPLIES, PALLETS
(LOT) 4 PALLET RACKS WITH CONTENTS- POWER SUPPLIES, LASER POWER SUPPLIES, CLEAN ROOM LIGHTS, BARRIER
(1) WATER CHILLER UNIT
(1) BLUE M 1300 DEGREE OVEN
(LOT) LINDBERG SOLDERING POT WITH EXTRA LEAD
(1) LABCONCO SPINNER/COATER
(LOT) 4 RACKS WITH CONTENTS- ULTRATECH POWER SUPPLIES, WEATHER STRIPPING, SHELVING
(LOT) 4 PALLET RACKS WITH CONTENTS- COMPUTER PARTS, LARGE PUMPS, MAGNIFYING GLASSES, MOTORS,
(1) CENTRAL MACHINERY PARTS WASHER
(1) R. Howard Strasbaugh 6BA-3 Lapping machine- 26” face, 8” holding rings, 3 9 1/4” rings, s/n 41-
(4) PALLET RACKS WITH CONTENTS- FILTERS, INSULATION, MATERIAL RACK, CHAIRS, DE HUMIDIFIERS
(1) GRIZZLY DUST COLLECTION UNIT
(12) SHOP RACKS WITH CONTENTS- VACUUM PUMPS, MISC. HARDWARE, NAILS, BOLTS, WASHERS, CASTORS
(7) MATERIAL DOLLIES
(LOT) 4 RACKS WITH CONTENTS- MISC. ELECTRICAL, BREAKERS, BREAKER BOXES, WIRE, FUSES, HARDWARE
(1) 40 LB ABRASIVE BLASTER TANK
(LOT) LARGE LOT OF RACKS WITH CONTENTS- MISC. HARDWARE, PVC, CASTORS, GAS LINES, SWITCHES
(1) SHOP BENCH WITH CONTENTS- HEAT PLATE, ULTRA SONIC CLEANER
(2) SMALL FLAMMABLE CABINETS
(2) FLAMMABLE CABINETS
(1) 15x25’ PAINT BOOTH WITH PAINT ACCESSORIES
(1) ACCU-SEP OIL SEPARATOR
(1) ULTRAFILLER AIR DRYER, WITH 80 GALLON TANK
(1) PORTABLE AIR COMPRESSOR
(1) Polar Air PRV0150003 Rotary Screw Compressor- 15 hp motor, hours- 417, s/n- 173214-EVO
(1) Polar Air PRV0150003 Rotary Screw Compressor- 15 hp motor, hours- 2,272, variable speed, s/n-
(1) P&G BEAD BLAST CABINET
(1) MINI TORCH CART SET
(1) TORCH CART SET
(1) MONTGOMERY WARD 250 AMP AC-DC ARC WELDER
(1) HOBART HANDLER WIRE FEED WELDER WITH CART AND TANK
5’x5’ WELDING TABLE WITH VISE
(1) 1HP MINI DUST COLLECTOR
(2) 1) MILWAUKEE LARGE ANGLE GRINDER 1) BLACK & DECKER HEAVY DUTY DRILL
(LOT) 1) VAN DORN HEAVY DUTY DRILL 2) JIG SAWS
(1) MAKITA 12” CHOP SAW
(1) 6” BELT, 12” WHEEL GRINDER
(1) CENTRAL MACHINERY DUAL WHEEL GRINDER
(1) PACKARD PRECISION 3/4” DRILL PRESS
(1) POWERFORMER DRY TYPE TRANSFORMER
(LOT) 3 SHOP CABINETS, 1 SHOP RACK
(LOT) MISC. REAMERS
(LOT) MISC. ROUGHING ENDMILLS
(LOT) MISC. ENDMILLS
(LOT) MISC. DOUBLE SIDED ENDMILLS
(LOT) MISC. CARBIDE ENDMILLS
(LOT) MISC. LARGE ENDMILLS
(LOT) MISC. CORNER ROUNDERS & KEYWAY CUTTERS
(LOT) MISC. TAPS
(LOT) MISC. DRILL BITS
(LOT) MISC. SLITTING SAWS
(LOT) R-8 COLLETS
(LOT) LONG SHANK DRILLS
(LOT) MISC. DRILLS AND DRILL BLANKS
(LOT) 2) KEY 3) KEYLESS CHUCKS
(2) TAP MATICS
(1) LAST WORD DRESSER
(LOT) 3 SHOP TABLES, 2 SHOP CABINETS WITH CONTENTS
(LOT) 1) 36”x48”GRANITE SURFACE PLATE 1) 36”x36” GRANITE SURFACE PLATE WITH STAND
(1) 24”x36” GRANITE SURFACE PLATE WITH TABLE
(1) HOWARD STRAUSSBAUGH 6UR-1 LAPPING MACHINE
(1) 24”x24” GRANITE SURFACE PLATE WITH STAND
(1) MITUTOYO PH-350 OPTICAL COMPARATOR- S/N- 7033
(1) SPITFIRE SP-888-36 PNLC Lapping Machine- s/n-7903-36PNLC-1738
(1) 1996 Acer AGS 1020 AFD Surface Grinder-Overhead manual parallel dresser, 8x18” magnetic chuck,
(LOT) SHOP BENCH & SHOP CABINET WITH CONTENTS- MISC. PARTS
(1) 23 DRAWER PARTS CABINET
(1) HUOT TOOL CART
(10) CAT-40 TOOL HOLDERS
(9) CAT-40 TOOL HOLDERS
(9) CAT-40 TOOL HOLDERS WITH TOOLS
(8) CAT-40 TOOL HOLDERS
(9) CAT-40 TOOL HOLDERS WITH FACE MILLS
(1) KURT 6” ANGLE LOCK VISE
(1) 1998 Fadal 3016 Vertical Machining Center- 7,500 rpm, 15 hp motor, cat 40, 21 tool ATC, table
(1) SHARP CNC MILL- 3HP MOTOR, SONY DRO, WORKS ONLY AS MANUAL MILL
(1) CENTRAL MACHINERY DRILLING/MILLING MACHINE WITH STAND
(LOT) 5-C COLLETS
(1) 6” 3 JAW CHUCK WITH SPARE SOFT JAWS
(1) TOOL POST WITH TOOL HOLDERS
(1) ALORIS TOOL POST WITH TOOL HOLDERS
(1) HARDINGE HLVH Super Precision Lathe- 1.5 hp motor, 3,000 rpm, 11” swing over bed, 1 1/4” spindle
(1) ENCO 137-317 METAL CUTTING BANDSAW
(1) DAREX E-90 TOOL GRINDER WITH STAND
(1) BALDOR 6” DUAL WHEEL GRINDER WITH HOFFMANN CART
(LOT) MISC. INSPECTION
(1) 3’x4’ TRU-STONE GRANITE SURFACE PLATE WITH STAND
(1) DIAL INDICATOR STAND
(1) PRECISION VISE
(1) WAFER STEPPER & MICROSCOPE SCALE
(LOT) PIN GAGES, WIRE GAGES & O PLUGS
(LOT) MISC ELECTRIC HAND TOOLS- JIGSAW, ANGLE GRINDER, CHAIN SAW, ELECTRIC DRILL
(1) BOSCH NIBBLER
(LOT) C-CLAMPS, WELDING CLAMPS
(LOT) MISC. HAND TOOLS- PIPE WRENCH, WRENCHES, FILES, SHEARS

Create an account

KS Equipment Inc. - Online Only Auction

Complete lots list (current bid high to low)

Subscribe to auction alerts

Create an account

Sign In to Your Account

Create an account

KS Equipment Inc. - Online Only Auction

Complete lots list (current bid high to low)

Subscribe to auction alerts

Create an account

Need more information?

Sign in to reveal more information on this auction