Multi Location Online Only Auction - Metalworking Machinery & Industrial

Hosted by Plant & Machinery Inc. on 2018-11-26 10:00:00 CST in Houston Texas United States

Complete lots list (current bid high to low)

MULTI TASKING LATHE, MURATEC MDL. MT 200-T2, CNC, installed 2015, Murateck Fanuc 31i CNC control,
FORKLIFT, TAYLOR 35,000 LB. CAP. MDL. THX350L, new 2012, 35,000 lb. cap. @ 48" load center,
HORIZONTAL MACHINING CENTER, OKUMA MILLAC MDL. 550H CNC, new 2011, Fanuc 16i-MB CNC control, 10,
VERTICAL MACHINING CENTER, HAAS MDL. VF-6SS, new 2013, 310 cutting hours, wired for 4th & 5th
FORKLIFT, TAYLOR 52,000 LB. CAP. MDL. Y52-WOS, diesel engine, 52,000 lb. cap. @36" L.C., 144/132
CNC GANTRY MACHINING CENTER, HAAS GR-710, New in 2006, 84” x 120” vacuum table, Travels: 121”-X,
FORKLIFT, CATERPILLAR 33,000 LB. CAP. MDL. DP150, new 1997, diesel engine, 197" standard mast, 96"
CNC PRESS BRAKE, DURMA MDL. AD-S 30135, new 2006, 148 Ton, 10' overall, 8' 6 inch between
MATERIAL STORAGE SYSTEM, 2005 STOPA TKL (3 tons per pallet - 60" x 120"): Dual Tower (5 x 10', 3 ton
FORKLIFT, HYSTER 15,500 LB. CAP. MDL. H155FT, new 2011, diesel engine, 185" triple stage mast,
VACUUM HEAT TREAT FURNACE, HEAT SOURCE, 12" W x 12" H. x 24" L, 2,650 deg. F. max temp., dual
ELECTRIC VACUUM TEMPER FURNACE, ABAR IPSEN MDL. VDFC 213, Min. 300°F/Max. 1300°F temp., 575V/3/60/94
CNC LATHE, HAAS MDL. ST-30, new 2013, Haas CNC control, 31.75" max. swing, 21" max. cutting dia.,
CNC LATHE, HAAS MDL. ST-30, new 2011, Haas CNC control, 31.75" max. swing, 21" max. cutting dia.,
FORKLIFT, HYSTER 8,000 LB. CAP. MDL. H80FT, new 2015, diesel engine, 109/159 standard mast, 60"L
FORKLIFT, HYSTER 12,000 LB. CAP. MDL. H120FT, new 2015, diesel engine, 109/159 standard mast, 48"
CNC LATHE, HAAS SL-20T, New in 2006, 23” max. swing, 10.3” max. turning dia., 20” cutting length, 8”
VERTICAL MACHINING CENTER, HAAS MDL. VF3B, new 2001, 48" x 18" table, 40" X-axis travel, 20" Y-
FORKLIFT, ELECTRIC TOYOTA 3,500 LB. CAP. MDL. 7FBEU18, new 2012, 36 v., 83/189 triple stage mast,
WELDING POSITIONER, ARONSON 50,000 LB. CAP., MDL. GE500CS, 96" X 96" table, 460 v., S/N 6716 (
5-AXIS TRUNNION TILTING ROTARY TABLE, HAAS MDL. TR210, 8.27" cap. (Location C: Moore Fabrication,
CNC TOOLROOM LATHE, HAAS MDL. TM1, new 2006, Haas CNC control, 47.75" x 10.75" table, 30" X-axis
FREE STANDING GANTRY CRANE SYSTEM, GORBEL 2,000 LB. X 20' SPAN, uprights, (3) separate rails (
HEAT TREAT BOX FURNACE, SUNBEAM, 1,200 deg. F. max temp., 48" W x 48" H x 54" L., electrically
GAS GENERATOR, SURFACE COMBUSTION RX (ENDOTHERMIC), 1950F, Marathon Monitors generator atmosphere
CNC TOOLROOM LATHE, HAAS TL-2, new 2006, 16” swing x 48” between centers, 2.3” spindle bore, 10
CNC TOOLROOM MILL, HAAS MINI-MILL, new 2001, Haas CNC control, 36" x 12" table, 16" X-axis travel,
CNC TOOLROOM LATHE, HAAS MDL. TM2, new 2006, Haas CNC control, 57.75" x 10.75" table, 40" X-axis
IRONWORKER, PIRANHA 50 T. CAP. MDL. P3, 6'L. squaring arm, foot pedal control, w/accessories (
SPOT WELDER, SCIAKY MDL. 3-76-250-24, 460 v., 250 KVA, Touchweld 3 phase weld controller, Machine
ROBOTIC WELDING SYSTEM, MOTOMAN SK6 + SK6, 2 SK6 Robots controller and pendant, Motoman Robot, Works
RADIAL ARM DRILL, 3' X 9" GIDDINGS & LEWIS BICKFORD, Chipmaster, S/N 951-00565-74. (Location M:
FORKLIFT, TOYOTA 10,000 LB. CAP., propane pwrd., 6'l forks, S/N NA (Location I: South Mountain
FORKLIFT, CATERPILLAR 20,000 LB. CAP. MDL. 850S, gasoline pwrd., 7'L forks, S/N 66L230. (Location I:
SIDE LOADER, BAUMANN TYPE AS60-1440, new 1997, diesel engine, 6,000 KG, S/N 4648. (Location K:
SHEAR, WYSONG 6' X 1/4", 3/16" in mild steel, S/N P26110. (Location E, M3 Distribution, 25116
TURRET PUNCH PRESS, STRIPPIT MDL. SUPER 30/30, 230 v/3 phase/60 Hz, 4.4 machine FLA, Cat. No.
NOTCHER, TENNSMITH, 8" MDL. PN9, S/N 14964 (Location E, M3 Distribution, 25116 Stanolind Road,
GAP BED ENGINE LATHE, ENCO LONGEM 20" X 80" MDL. LG-2080DS, Anilam 2-axis D.R.O., 3-1/2" spdl. bore,
GAP BED ENGINE LATHE, DIANICHI 24" X 120" MDL. DH-115, new 5/1967, Acu-Rite D.R.O., steadyrest, 15-
AUTOMATIC SERVO PRESS FEEDER, PRESSROOM EQUIPMENT MDL. P450F12R3125PRPCS, PULL THROUGH
AUTOMATIC SERVO PRESS FEEDER, PRESSROOM EQUIPMENT MDL. P450F24R3245PRCS, 24" max. width, 910" max.
4-AXIS ROTARY INDEXER, HAAS MDL. HR210, 8" faceplate, S/N 2269 (Location C: Moore Fabrication,
WELDING POSITIONER, ARONSON 500 LB. CAP., MDL. RDE-15 SD, (2) 36" tables, S/N 9812. (Location B:
HYDRAULIC DOUBLE PINCH BENDING PLATE ROLL, WKM 3/8" X 4' MDL. 400-7-4, new 2000, 5 HP motor, motor
MARLEY AQUATOWER, (3) fan units, (2) 500 gal. water holding tanks, mtd. on
CENTERLESS GRINDER, CINCINNATI MILACRON NO. 2 MDL. EA, 1/16" to 3" diameter capacity, 16" min.
ENGINE LATHE, LEBLOND REGAL 17" X 78", Bison 10" dia. 3-jaw chuck, taper attach., spds: 25-1000 RPM,
SWEEPER/RETRIEVER, ADVANCE MACHINE COMPANY MDL. 5800, S/N 1238953 (Location I: South Mountain
HEAT TREAT BOX FURNACE, SUNBEAM, 24"W. x 18" H. x 36"L, 1,950 deg. F. max temp., atmosphere capable,
INDUCTION HEATING FURNACE, RADYNE BRAZING TYPE, 40 Kw, 40/50 kHz, dual heat stations, waer system
INDUCTION HEATING FURNACE, AJAX, 25 kW, 3/10 kHz includes water pump and heat exchanges. LOADING
CABINET OVEN, GRIEVE, 20" w X 20" H X 20" l, 500 deg. F. max temp., gas fired, solvent rated,
TURRET PUNCH PRESS, STRIPPIT FABRI-CENTER MDL. FC1250/30/1500, CNC, Houdaille HCC-80 CNC control, 20
TURRET PUNCH PRESS, STRIPPIT FABRI-CENTER, MDL. FC-1000, CNC, Houdaille HECC-80 CNC control, S/N NA.
TURRET PUNCH PRESS, STRIPPIT FABRI-CENTER, MDL. FC-1000, CNC, Houdaille HECC-80 CNC control, S/N
PRESSBRAKE, PREMIER 35 T. CAP. MDL. 535.2, new 1997, 5' cap., Autobend 7 control, 5 HP motor,
PRESSBRAKE, PREMIER 70 T. CAP. MDL. 670.CR, new 2001, 6' cap., Cybelec control (needs repair), 10 HP
ENGINE LATHE, MONARCH 25" X 72" MDL. 2516X72, new 1971, 16" over crosslide, taper attach.,
GAP BED ENGINE LATHE, ENCO, LONGEM 20" X 80" MDL. LG-2080DS, Anilam 2-axis D.R.O., 3-1/2" spdl.
IRONWORKER, SCOTCHMAN MDL. 4014-C, 3 HP motor, 230 v., 40 T. punching cap., 5/8" x 5", 1/4" x 6",
CONTOUR BANDSAW, DOALL 36" X 20" MDL. ZW-3620, 30" x 36" table, 236" bandsaw length, 45 deg. tilting
CUT OFF PRESS, YODER 30 T. CAP., new 2004, 0 to 3" stroke, 3-1/2" x 25" die, S/N 76103051504 (
SEAM WELDER/BUTT WELDER, IRONBAY MDL. FM53, new 1999, 24" cap., Lincoln Squarewave TIG 175 pwr.
OBI PUNCH PRESS, CLEARING TORC-PAK 60 T. CAP., Triad Mdl. 3200 control, 6" stroke, 18" shut ht.,
PUNCH PRESS WITH STRAIGHTNER & FEEDER, PRESSROOM EQUIPMENT MDL. P20F06HDR2065PRHS SERVO FEEDER/
ROLLFORMER, CUSTOM, (8) die sets in line & misc. dies (Location D: Specialized Manufacturing, 8101
ROLLFORMER, CUSTOM, (16) die sets in line & misc. dies (Location D: Specialized Manufacturing,
CNC TURRET PUNCH PRESS, MURATA WIEDEMANN MDL. C-2000I, S/N 2618 (*Note: machine is out of service.
WIRE EDM MACHINE, CHARMILLES TECHNOLOGIES ROBOFILL MDL. 290, new 1996, 15.75" X-axis travel, 9.85"
COOLING TOWER, MARLEY AQUATOWER, (3) fan units, (2) 500 gal. water holding tanks, mtd. on
ROBOTIC WELDING CELL, MOTOMAN MDL. SK16-6, Master S/N S52137-1-1-5 & Slave S/N S52I66-1-1-2,
ROBOTIC WELDING CELL, MOTOMAN MDL. UP20M, (2) robot welding cell - Master S/N S010602 & Slave S/N
HYDRAULIC SHEAR, 5/8" x 12'L PACIFIC . MDL. 625S12ARL, 147" distance between housings, motorized
COOLANT CHILLER, CHIP BLASTER Mdl. SA-34K, 34,000 BTU, (Location C: Moore Fabrication, 5645
MICROSCOPE, VISION ENGINEERING MANTIS ELITE (Location C: Moore Fabrication, 5645 Northdale Street,
VERTICAL TURRET MILL, SEIKI-XL MDL. 3VH, new 1988, 10" x 50" table, 3 HP motor, variable spd.
ENGINE LATHE, VICTOR 16" X 60" MDL. 1660, 10" dia. 3-jaw chuck, spds: 65-1200 RPM, 2" spdl. bore,
DOWNFLOW DUST COLLECTOR, TORIT MDL. POWERPAK 2SG-3852101, (8) cartridge, 7-1/2 HP motor, Shop No.
VERTICAL TURRET MILL, BRIDGEPORT SERIES 1, 9" x 42" table, long. pwr. feed, Jacobs chuck, 2 HP
COMBINATION BELT & DISC GRINDER, SHOPFOX MDL. W1712, new 2016, 6"W. x 48" belt, 12" disc, 1-1/2 HP
WELDING POSITIONER, RANSOME 2,500 LB. CAP. SIZE 25, dbl. swiveling table, S/N 5890 (Location F:
FINGER BRAKE, CHICAGO 6' MDL. BP-612-6, S/N 300956 (*Note: some fingers are missing) (Location F:
STUD WELDER, BURCO/KOCO MDL. SW2000 E-2, dual stud guns, 2,000 amp output, 200/230/460 input, S/N-
OVERHEAD GANTRY CRANE SYSTEM, PROSERV 3 T. X 25' SPAN, Shawbox hoist, underslung, sgl. girder, w/
SHAPER, AMERICAN 24", 24" stroke, 24" x 16" x 16" ht. T-slotted table (Location D: Specialized
MITERING CHOP SAW, SCOTCHMAN BEWO MDL. 350LT/PK/PD, 3 HP motor, 440 v., 5.5 fluid amps, foot pedal
POWER INVERTER FOR ROBOTIC WELDER, MILLER AUTO INVISION II, S/N LC088813 (Location N: Hippo
STORAGE TANK, 2,000 GALLON CHERRY-BURRELL MDL. GHW, 316 SS double walled, 3,515 lbs, S/N 20-74-2795.
STORAGE TANK, 2,000 GALLON CHERRY-BURRELL MDL. GHW, 316 SS double walled, 3,515 lbs, S/N 20-67-2336.
STORAGE TANK, 2,000 GALLON CHERRY-BURRELL MDL. HCWE, 316 SS double walled, 3,515 lbs, S/N 2000-55-
ELECTRIC SCISSOR LIFT, JLG COMMANDER MDL. CM26N, 26' max. plate height, 750 lbs. capacity, S/N
VERTICAL BANDSAW, DOALL, MDL. 3612-3, 36" throat, 12" height, 3 HP, S/N 153-69-1023. (Location M:
AIR DRYER, VAN AIR, MDL. RD500A/C, refrigerated air dryer, 520 SCFM, S/N 09E-D08394. (Location M:
LOT OF CANTILEVER RACKS (2), approx. 7' ht. x 9'L., adj. (contents not included) (Location F: All
AIR DRYER, ZEKS HEAT SINK MDL. 35HSEA100, S/N 116027-3N (Location F: All Fab Welding, Inc.,8617
RECIPROCATING AIR COMPRESSOR, RANGER MDL. 202480-5, new 1988, 5 HP motor, 80 gal. air receiving
POWER & IDLER TURNING ROLL SET, PANDJIRIS APPROX. 5 T. CAP., pwr. roll & idler, S/N N.A. (Location
COMBINATION BELT & DISC GRINDER, SHOPFOX MDL. W1712, new 2010, 6"W. x 48" belt, 12" disc, 1-1/2 HP
HORIZONTAL BANDSAW, W.F. WELLS, 12'L. conveyor, 7" cap. saw (Location F: All Fab Welding, Inc.,
PLASMA CUTTER, PLASMARC MDL. PCM70, 325 DC OSV, 38 amps @ 230 v., 19 amps @ 460 v., S/N 870-74264 (
PORTABLE WELDER/GENERATOR, LINCOLN WELDANPOWER, 225 amps, gasoline pwrd., S/N A1003621 (Location
MIG WELDER, MILLER MDL. DELTAWELD 452, 450 amps, 100% duty cycle, S/N KG2700852, Miller 60 Series 24
TIG WELDER, MILLER MDL. SYNCROWAVE 351, 300 amps @ 32 v., 100% duty cycle, S/N KG112232 (Location F:
HIGH SPEED HACKSAW, MARVEL MDL. 6A, vise, approx. 10'L. roller conveyor (Location F: All Fab
BARFEEDER, HAAS SERVOBAR MDL. 300 (Location D: Specialized Manufacturing, 8101 Fite Road,
PLASMA CUTTING SYSTEM, ESAB MDL. ACER-2-VISPC, 10 amp full load current, 6' x 24'L. table travels,
STEEL FABRICATED PLATE STORAGE PALLET SYSTEM, CONSISTING OF (2) 144" L x 68" W shelves, rollers on
H-FRAME PRESS, KAAST 60 T. CAP. MDL. HPA-60, new 2014, mtd. on steel riser block, S/N 181788 (
LOT OF DUST COLLECTORS (2), MICROAIR MDL. MX3510 (Location D: Specialized Manufacturing, 8101 Fite
DUST CONTROL UNIT, DCE MDL. UMA72G1AD, 110 v., sgl. phase, .75 KW, S/N 88-1615 (Location D:
UNCOILER/STRAIGHTNER FEEDER EGAN PRESSPARTNER, Uncoiler Mdl. M401-20 - S/N 3437, Press Feeder Mdl.
HYDRAULIC 4-POST PRESS, CUSTOM, 24" x 36" table, 6" hole, 8" dia. hyd. ram, 20" vert. height, w/Mdl.
HYDRAULIC UNIT, 50 HP motor, large cap. hyd. tank, cooling fan, regulator, control unit, 460 v. (
DIGITAL READOUT SYSTEM, NEWALL TOPAZ, 12" & 30" scales, new in box (Location F: All Fab Welding,
MIG WELDER, OTC-DAIHEN, MDL. 350-XSR, S/N P6447YDK176271003, with CM-741 OTC Daihen Wire Feeder, S/N
MIG WELDER, OTC-DAIHEN, MDL. 350-XSR, S/N P6447YDZ113831003, with CM-231 OTC Daihen Wire Feeder, S/N
PUNCH PRESS, PIRANHA SEPP-35, 35 Ton, S/N 175 (Location M: Fabcorp Inc., 6951 West Little York,
VERTICAL PLATE CLAMPS, (2) Pallets of 11, (Location M: Fabcorp Inc., 6951 West Little York, Houston,
CHILLER UNIT, SOURCE METALS, TrueTon Chiller, (Location M: Fabcorp Inc., 6951 West Little York,
TRACK TORCH, ULTRA-LINE MDL. 507, 1 amp, 115 v., 60 Hz, variable spd., w/track (Location F: All
FORKLIFT, TOWMOTOR 3,500 Cap., solid tires, LP. (Location F: All Fab Welding, Inc.,8617 Pagewood
ELECTRIC PALLET LIFT, CROWN 1,500 LB. CAP. MDL. V-57, 20" L.C., S/N 1313144 (Location F: All Fab
LOT CONSISTING OF: Ridgid Mdl. 300 pipe threader on tripod stand & approx. 5" dia. threading attach.
BEAD BLASTER, CUSTOM, Trinco Blast Cabinet, reclamation system, auto. tumbling basket for part
BEVELING MACHINE, C.A. MATHEY 8", S/N 89708SA (Location F: All Fab Welding, Inc.,8617 Pagewood
BEVELING MACHINE, C.A. MATHEY, 8" to 12" cap., S/N 9474-12SA (Location F: All Fab Welding, Inc.,8617
BEVELING MACHINE, C.A. MATHEY, 18" to 20" cap., S/N 988420SA (Location F: All Fab Welding, Inc.,8617
H-FRAME PRESS, w/Enerpac 15 T. foot operated pneu. power pack (Location F: All Fab Welding, Inc.,
WELDING MACHINE, MILLER MAXTRON, 450 amp CC/CV, 230/460 volt input, 1/3 phase, S/N KD496251 (
WELDING MACHINE, LINCOLN MDL. DC-655, CC stick, CV Mig, CV Subarc, S/N U1070110269 (Location B:
WELDING MACHINE, LINCOLN MDL. DC-655, CC stick, CV Mig, CV Subarc, S/N U1071105655 (Location B:
WELDING MACHINE, LINCOLN MDL. DC-655, CC stick, CV Mig, CV Subarc, S/N U1061206953 (Location B:
WELDING MACHINE, LINCOLN MDL. DC-655, CC stick, CV Mig, CV Subarc, S/N U1070110263 (Location B:
TOOL & CUTTER GRINDER, CINCINNATI NO. 2, 220 v., 3 phase, 1 HP motor, S/N 1D2T6C-1 (Location D:
ULTRASONIC CLEANING CONSOLE, AMSCO, (2) 24" tanks (Location D: Specialized Manufacturing, 8101
HORIZONTAL BAND SAW, VICTOR MDL. MH-1016JA, 10" CAP. ROUND, 2 HP MAIN MOTOR, S/N 860326 (Location D:
AUTOMATIC SURFACE GRINDER, ELB, 12 x 36 electromagnetic chuck, 3-axis (Location D: Specialized
SPOT WELDER, STANDARD MDL. FR2-12-30 (Location D: Specialized Manufacturing, 8101 Fite Road,
DEBURRING MACHINE, HUPP CORP. GLOBE, 32" tumbler, 1 HP motor, S/N 9920 (Location D: Specialized
HYDRAULIC POWER UNIT, CUSTOM, 15 HP motor, approx. 50 gal. tank, controls, cooling fan (Location
HORIZONTAL HYDRAULIC RAM, ARISTO MACHINES, Parker 30 gal. hyd. tank w/10 HP motor, foot control, S/N
ROLLFORMER BASE, YODER, 116"L. x 66"W. x 25" ht., (2) Bestek dies - Part No. P2765 & No. P2064 (
PUNCH PRESS, MULTI-MAX DIAMOND, 24" dist. btn. posts, 10" depth (Location D: Specialized
OBI PUNCH PRESS, CUSTOM, Leeson 3 HP motor, S/N N.A. (Location D: Specialized Manufacturing, 8101
OBI PUNCH PRESS, BENCHMASTER MDL. 152E, 6 x 9 table, S/N 46114 (Location D: Specialized
OBI PUNCH PRESS, ROUSSELLE MDL. 2, 11 x 17 table, S/N 1065 (Location D: Specialized Manufacturing,
OBI PUNCH PRESS, ROUSSELLE MDL. 2, 11 x 16 bed, S/N 1465 (Location D: Specialized Manufacturing,
OBI PUNCH PRESS, ROUSSELLE MDL. 20, 26 x 16 bed, S/N 11 (Location D: Specialized Manufacturing, 8101
AUTOMATIC PUNCH PRESS, DIEBELL MACHINE CORP., 20" R-L & 20-1/2" F-B bed areas, 2-1/2" stroke, 9"
DC ARC WELDER, MILLER SRH-333, S/N HD678524, (Location C: Moore Fabrication, 5645 Northdale
DIGITAL HEIGHT GAUGE, 12" (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX 77087)
VERNIER CALIPER, 80" (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX 77087)
BLAST CABINET, TRINCO 36" MDL. 36/BP, dust collection system, S/N 54754-1 (Location C: Moore
RECIPROCATING AIR COMPRESSOR, INGERSOLL RAND T30 MDL. 2475, S/N 8888880 (Location C: Moore
RECIPROCATING AIR COMPRESSOR, INGERSOLL RAND MDL. T30, 10 HP motor, S/N 00007256 (Location C:
BOX FAN, 48" (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX 77087)
DUST COLLECTION SYSTEM, A.F. INTERNATIONAL ARRESTALL (Location C: Moore Fabrication, 5645
HARDNESS TESTER, ROCKWELL MDL. 3JR, w/stand & accessories, Tester No. 3JR841 (Location C: Moore
VISE, 6" (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX 77087)
VISE, YUASA 6" (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX 77087)
VISE, KURT 6" (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX 77087)
VISE, KURT 8" (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX 77087)
LOT OF GAUGES: plug & pin (in one box) (Location C: Moore Fabrication, 5645 Northdale Street,
LOT OF TOOLHOLDERS, CAT-40 (approx. 16) (Location C: Moore Fabrication, 5645 Northdale Street,
VISE, KURT 6", S/N D675 (Location F: All Fab Welding, Inc.,8617 Pagewood Ln., Houston, TX 77063)
LOT OF PIPE STANDS (6) (Location F: All Fab Welding, Inc.,8617 Pagewood Ln., Houston, TX 77063)
VIBRATORY DEBURRING MACHINE, (Location D: Specialized Manufacturing, 8101 Fite Road, Pearland, TX
SQUARE TUBE DEBURRING MACHINE, RASAMAT MDL. RSA2001, Machine No. 40116204 (Location D: Specialized
LOT OF TOOLHOLDERS, No. 40 taper, misc. (Location C: Moore Fabrication, 5645 Northdale Street,
LOT CONSISTING OF: (approx. 10) CAT-40 toolholders, misc. cutters & accessories (Location C: Moore
LOT OF TOOLHOLDERS, CAT-40 (approx. 10) (Location C: Moore Fabrication, 5645 Northdale Street,
SHEET METAL/PIPE RACK, 5 shelves, approx. 10' long, custom built, (Location F: All Fab Welding,
STORAGE CONTAINER, steel construction, approx. 7'L. x 4'W., H.D. (Location F: All Fab Welding,
LOT CONSISTING OF: (1) cabinet w/misc. degreaser & supplies, (1) pigeon hole cabinet w/misc. nuts,
WELDING TABLE, approx. 7' x 5', 1/2" thk. steel plate, vise, H.D. (Location F: All Fab Welding,
LOT OF CLAMPS: assorted hand & C (Location F: All Fab Welding, Inc.,8617 Pagewood Ln., Houston, TX
LOT OF GRINDING WHEELS, mics. (in two buckets) (Location F: All Fab Welding, Inc.,8617 Pagewood Ln.,
LOT OF PNEUMATIC AIR TOOLS (Location F: All Fab Welding, Inc.,8617 Pagewood Ln., Houston, TX 77063)
LOT OF ELECTRIC TOOLS: angle grinder, right angle drill, straight disk grinder, reciprocating
LOT CONSISTING OF: (3) welding tables & (2) saw horses (Location F: All Fab Welding, Inc.,8617
LOT OF PALLET RACK SECTIONS (2): approx. 7'W. x 4' dp. x 3 tier, steel construction (Location F: All
LOT OF LAWN EQUIPMENT: (1) Yard Machine 4.5 HP lawn mower, (1) Briggs & Stratton lawn mower, (3)
LOT OF WELDING ACCESSORIES: wire, flow meters, torch regulators, valves, etc. & cabinet w/bundles of
LOT CONSISTING OF: (2) oxy./acy. carts w/torches & gauges & (1) banding cart (Location F: All Fab
PROPANE HEATER, w/(2) tanks (Location F: All Fab Welding, Inc.,8617 Pagewood Ln., Houston, TX
LOT OF SHOP FANS, assorted (approx. 5) (Location F: All Fab Welding, Inc.,8617 Pagewood Ln.,
LOT OF STANDS: roller, pipe, helper & jack (Location F: All Fab Welding, Inc.,8617 Pagewood Ln.,
TABLE SAW, SEARS CRAFTSMAN 10" MDL. 113.298051, motorized, tilting table, miter cutting, S/N
DRILL PRESS, SEARS CRAFTSMAN 20" CONTRACTOR SERIES, 2 HP motor, 3/4" chuck, (12) spds: 150-4200 RPM,
VERTICAL BANDSAW/SANDER, SEARS CRAFTSMAN 12" MDL. 113245440, S/N 1009.P0179 (Location F: All Fab
WELDING MACHINE, AIRCO MDL. AIRCOMATIC 2.5DTR-224-A C.V., 250 amps DC rectifier, S/N U4772800 (
MIG GUN, MIDGET AIRCOMATIC MDL. AH20E, 50' lead (Location F: All Fab Welding, Inc.,8617 Pagewood
LOT OF COPPER LEADS (on one pallet) (Location F: All Fab Welding, Inc.,8617 Pagewood Ln., Houston,
CONTACTOR KIT, LINCOLN ELECTRIC 600 AMPS (Location F: All Fab Welding, Inc.,8617 Pagewood Ln.,
CABINET, w/misc. chuck jaws, tooling & new Koyo bearings (Location F: All Fab Welding, Inc.,8617
LOT CONSISTING OF: worktable w/H.D. vise, live & dead centers, toolpost w/lathe tooling, broaches,
LINDE MIG WELDING POWER SOURCE w/wire feeder & HOBART WELDING POWER SOURCE, accessories (Location D:
ABRASIVE CUTOFF SAW, EVERETT INDUSTRIES (Location D: Specialized Manufacturing, 8101 Fite Road,
DAYTON MOTORS (Location D: Specialized Manufacturing, 8101 Fite Road, Pearland, TX 77584)
PRESS TOP PLATE & DRIVESHAFT (Location D: Specialized Manufacturing, 8101 Fite Road, Pearland, TX
CHILLER, APPLIED PROCESS EQUIPMENT CORP. (Location D: Specialized Manufacturing, 8101 Fite Road,
DIE SET, 36" x 18" (Location D: Specialized Manufacturing, 8101 Fite Road, Pearland, TX 77584)
WELDING BOOM, BERNARD MDL. 2675 (Location D: Specialized Manufacturing, 8101 Fite Road, Pearland, TX
WELDING MACHINE, MILLER MDL. 400SP, 400 amps, S/N HF878207 (Location D: Specialized Manufacturing,
COIL FEEDER, TYCO 12" (Location D: Specialized Manufacturing, 8101 Fite Road, Pearland, TX 77584)
LOT CONSISTING OF: (4) scales, Central Machinery bandsaw, dolly, wire basket (Location D:
UPRIGHT DRILL PRESS, REXON 20-1/2" MDL. RDM270F (Location D: Specialized Manufacturing, 8101 Fite
CUT-OFF SAW, WILTON COBRA MDL. 350, S/N 020545 (*Note: partially disassembled) (Location D:
BELT CONVEYOR, HYTROL, 7'L. x 7-1/2"W. (Location D: Specialized Manufacturing, 8101 Fite Road,
HYDRAULIC RAM PRESS, CUSTOM (Location D: Specialized Manufacturing, 8101 Fite Road, Pearland, TX
HYDRAULIC CLAMPING SYSTEM, UNISTRUT CORP., hand controls, adj. stops (Location D: Specialized
LOT OF ROLLER CONVEYORS (2), (1) pair of 36" dia. pair & (1) sgl. approx. 36" (Location D:
HARDNESS TESTER, ROCKWELL (*Note: needs repair) (Location D: Specialized Manufacturing, 8101 Fite
LOT OF GAS FIRED HEATERS (2), MODINE MDL. PA400AC, 400,000 BTU's max. input, S/N 0110107285, S/N N.
CHILLER, ADVANTAGE MDL. SC2APT-20HFX, new 1996, S/N 28696 (Location D: Specialized Manufacturing,
PUNCH PRESS, BENCHMASTER, bench top, S/N N.A. (Location D: Specialized Manufacturing, 8101 Fite
LOT CONSISTING OF: Fluke meter, O.D. micrometer, vernier caliper, gauges (Location C: Moore
LOT CONSISTING OF: calipers, Mitutoyo pin micrometer, Gem I.D. gauge (Location C: Moore Fabrication,
LOT OF BORE GAUGES, assorted (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX
HEIGHT GAUGE, FOWLER 12" (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX 77087)
LOT CONSISTING OF: drill bits, endmills, die (in two boxes) (Location C: Moore Fabrication, 5645
LOT OF DRILLS, assorted (in two boxes) (Location C: Moore Fabrication, 5645 Northdale Street,
LOT OF ENDMILLS, assorted (in one box) (Location C: Moore Fabrication, 5645 Northdale Street,
LOT OF SCHUNK TOOLING, assorted (in one box) (Location C: Moore Fabrication, 5645 Northdale
LOT CONSISTING OF: set-up tooling (in four boxes) & (2) Teco stands (Location C: Moore
LOT OF COLLETS, assorted (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX 77087)
LOT OF CHUCKS: (1) Buck 7-1/2" dia. 3-jaw w/D mount & (1) 6-1/2" dia. 3-jaw (Location C: Moore
CHUCK, 12" dia. 4-jaw, 3" bore (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX
CHUCK, JIANHUA, 15-3/4" dia. 4-jaw, 4-3/4" bore (Location C: Moore Fabrication, 5645 Northdale
CHUCK, BUCK 15-3/4" MDL. IND1016R, 3-3/4" bore, steel fabrication, 2 pc. jaws (Location C: Moore
LOT OF JACOBS CHUCKS, assorted (approx. 9) (Location C: Moore Fabrication, 5645 Northdale Street,
LOT OF CUTTING HEADS, misc. (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX
LOT CONSISTING OF: boring head & endmill (Location C: Moore Fabrication, 5645 Northdale Street,
TRUNNION TABLE, MMS 18" (Location C: Moore Fabrication, 5645 Northdale Street, Houston, TX 77087)
Multi Location Online Only Auction - Metalworking Machinery & Industrial

Create an account

Multi Location Online Only Auction - Metalworking Machinery & Industrial

Complete lots list (current bid high to low)

Subscribe to auction alerts

Create an account

Sign In to Your Account

Create an account

Multi Location Online Only Auction - Metalworking Machinery & Industrial

Complete lots list (current bid high to low)

Subscribe to auction alerts

Create an account

Need more information?

Sign in to reveal more information on this auction